This letter describes an inverter-based analog receiver frontend that was evaluated within a complete ADC-based 56 Gb/s PAM-4 wireline transceiver system. The front-end contains hybrid continuous-time linear equalizers (CTLE) with low-and high-frequency peaking as well as inverter-based programmable gain amplifiers (PGA) that serve as buffers for the 32x time-interleaved SAR ADC. The inductorless design achieves high bandwidth through a reduced number of equalizer stages (with fewer parasitic poles) and active peaking techniques. The transceiver that contains the AFE achieves <10-6 BER over a backplane channel with 35 dB loss at 14 GHz and with 2 mVrms input crosstalk noise. The AFE core occupies 0.00425 mm2 in 16 nm FinFET CMOS and consumes 165 mW.
6 August 2020 in IEEE Solid-State Circuits Letters
The data rate-times-distance product in mm-wave dielectric waveguide communication links is usually limited by waveguide dispersion. This paper presents the dielectric waveguide’s baseband impulse response in the context of a homodyne receiver, and introduces a continuous-time linear equalizer able to minimize such dispersion. The desired transfer function is implemented with inverter-based transconductance cells. Simulation and measurement results at 10 Gbps data rate show eye-opening improvement at two distances (10 m and 15 m) and carrier frequencies (140 GHz and 160 GHz). The equalizer occupies 80 x 32 μm in GLOBALFOUNDRIES 22 nm FD-SOI.