26 May 2020 in Physical Review E
Magnetic nozzles are convergent-divergent applied magnetic fields which are commonly used in electric propulsion, manufacturing, and material processing industries. This paper studies the previously overlooked physics in confining the thermalized ions injected from a near-uniform inlet in the magnetic nozzle. Through fully kinetic planar-3V particle-in-cell (PIC) modeling and simulation, an electric potential barrier is found on the periphery of the nozzle throat, which serves to confine the thermalized ions by the electric force. With the initial thermal energy as driving force and insufficient magnetic confinement, the ions overshoot the most divergent magnetic line, which results in the accumulation of positive space charges around the throat. The accumulated charges would create an ion-confining potential barrier with limited extent. Apart from the finite-electron Larmor radius (FELR) effect, two more factors are put forward to account for the limited extent of the potential barrier: the depletion of ion thermal energy and the short-circuiting effect. The influences of inlet temperature ratio of ions to electrons and magnetic inductive strength are quantitively investigated using the PIC code. The results indicate that the potential barrier serves as a medium to transfer the gas dynamic thrust to the magnetic nozzle while providing constrain to the ions, like the solid wall in a de Laval nozzle. In high- regime, the finite-ion Larmor radius (FILR) effect becomes dominant rather than the FELR effect in the plasma confinement of magnetic nozzles.
1 October 2021 in Plasma Sources Science and Technology
The azimuthal currents in the divergent magnetic nozzle of the electrodeless plasma thrusters are investigated using a two-dimensional axisymmetric particle-in-cell code. In this paper, the azimuthal currents are decomposed into four components—the diamagnetic drift current, the E × B drift current, the viscous-stress-induced current and the inertia-induced current. The azimuthal current and its four components are analyzed under three magnetization levels of 0.25 T, 0.75 T and 2.15 T. In the absence of inlet ion temperature, the azimuthal currents mainly consist of electron currents resulted from ∇ p e , E × B drift and electron viscosity, while the azimuthal currents caused by the inertia can generally be neglected. The azimuthal ion currents considered negligible in previous studies are shown to be non-negligible in the highly-magnetized and collisionless magnetic nozzle, where the dominant mechanism for its formation is E × B drift and drift from the centrifugal force. In the upstream and midstream, the compositions and distributions of the azimuthal currents can vary at different radial positions and magnetization conditions because of the influence of the electric potential barrier and the high density conic. In the downstream, a vast range of paramagnetic currents are produced by the E × B drift due to ion inward detachment. And the paramagnetic stress-induced current begins to prevail due to the FELR effect. Superimposed with the paramagnetic part of the diamagnetic drift current under a high magnetic field, they can undermine the thrust gain coefficient of the magnetic nozzle.
1 May 2022 in Plasma Sources Science and Technology
A fully kinetic particle-in-cell study is conducted to investigate the ion acceleration mechanisms in an electron-driven magnetic nozzle. All five powers contributing to the axial kinetic energy of ions are derived and evaluated under different magnetic field strength and inlet density profiles. Among them, the electrothermal and electromagnetic acceleration contributes over 98% of the total accelerating power. The dominating acceleration mechanism is found to be the electrothermal acceleration, covering two thirds of the axial accelerating power in the electron-driven magnetic nozzle. The electromagnetic mechanism is found to originate from four sources, among which the major accelerating and decelerating one are the diamagnetic acceleration driven by radial gradient of electron pressure and the E × B mechanism due to the inward ion detachment. The power induced by the viscous-stress of electrons contributes 14%–23% of the decelerating power, indicating the non-negligible influence of finite electron Larmor radius effect on the ion acceleration. Results indicates that the net effect of electromagnetic mechanism can even be decelerating when the magnetic field is too high with a uniform inlet. Finally, the conversion efficiency from the inlet thermal energy to the ion axial kinetic energy is derived and evaluated, which can reach as high as 65.0% under 0.25 T with a Gaussian-profile inlet. Raising the magnetic field to 0.75 T or a uniform inlet will decrease the conversion efficiency.
1 August 2020 in Plasma Sources Science and Technology
Hall-effect thrusters (HET) are a stationary form of electric propulsion that have been widely used in space missions. However, the wide range of the divergence angle of the HET plasma plume and the high ion velocities can result in a large area where collisions and plume interactions occur. Of these, low-energy charge-exchange (CEX) ions typically originate from collisions, and can result in severe deposition and sputtering issues on spacecraft components. In this work, we propose a novel magnetic Faraday probe in coordination with a particle-in-cell (PIC) simulation code. This system is able to deflect CEX ions with a changing solenoid current, and can be used to obtain the ion density and energy levels of CEX ions through experimental measurements. In addition, a Faraday probe, a retarding potential analyzer (RPA), and a Langmuir probe were used to obtain the beam characteristics. The CEX ion density at the beam edge area was determined to be in the level of 2.54 × 10 12 m −3 (the local ion density of the plasma plume is in the level of 10 13 m −3 ), and the ion energy level at the beam edge area was found to be below 30.1 eV. Due to the difference in the vacuum levels between ground tests and in-space operation, CEX collisions will be more severe during ground tests, and can affect plume measurements and erosion of the thruster. Two different vacuum levels were tested experimentally here to study the relationship between CEX ions and the background neutrals. As a result, it was found that a high background neutral density can exacerbate CEX collisions at the beam edge area, which results in an increase in the CEX ion density and a decrease in the CEX ion energy. This study brings us new information on the CEX ion density and energy distribution at the beam edge area from an experimental point of view. Furthermore, data on CEX ions energy can be used as input data for future plume simulations.
22 January 2021 in Journal of Physics D: Applied Physics
A method based on image reconstruction is proposed for measuring the electron temperature ( ) and density ( ) distribution of the axisymmetric low-temperature argon plasma plume of applied-field magnetoplasmadynamic thrusters (AF-MPDTs). The method uses a complementary metal–oxide–semiconductor camera with narrowband filters of 460 and 500 nm to obtain the raw projection images in specific wavelength ranges. An image reconstruction method is developed to construct relative emission intensity profiles. The electron temperature distribution can be obtained by combining the relative emission intensity ratio of two profiles with a simple argon kinetic model. The electron density distribution can be calculated by constructing a function of relative emission intensity containing and . To verify the feasibility of this method, we diagnosed a very near field plume of a 15 kW AF-MPDT and obtained the distribution of parameters with a spatial resolution of 0.23 mm. The results show that the maximum and are located on the centerline near the exit plane of the thruster and decrease with both radial and axial distances. The second peak appears in the radial direction of both the and distributions, while their zones do not overlap. A comparative analysis of measurement results obtained by this method and the Langmuir probe method is performed to prove its accuracy. Moreover, this measurement method has the advantages of high spatial resolution and the ability to diagnose high-density and magnetized plasma. This method can be also applied to other optically thin axisymmetric low-temperature argon plasmas.
1 September 2018 in Vacuum