Nanowire-based THz detection: Terahertz (THz) radiation is an interesting region of the electromagnetic spectrum lying between microwaves and infrared. Non-ionizing and transparent to most fabrics, it is finding application in security screening and imaging but is also being developed for communication and chemical sensing. To date, most THz detectors have focused just on signal intensity, an effort that discards half the signal in terms of the full optical state, including polarization. Peng et al. developed a THz detector based on crossed nanowires (arranged in a hash structure) that is capable of resolving the full state of the THz light. The approach provides a nanophotonic platform for the further development of THz-based technologies. Science , this issue p. 510
The heterogeneous integration of micro and nanoscale devices with on-chip circuits and waveguide platforms is a key enabling technology, with wide-ranging applications in areas including telecommunications, quantum information processing and sensing. Pick and place integration with absolute positional accuracy at the nanoscale has been previously demonstrated for single proof of principle devices. However, to enable scaling of this technology for realisation of multi-element systems, or high throughput manufacturing, the integration process must be compatible with automation whilst retaining nanoscale accuracy. In this work, an automated transfer printing process is realised using a simple optical microscope, computer vision and high accuracy translational stage system. Automatic alignment using a cross-correlation image processing method demonstrates absolute positional accuracy of transfer with an average offset of < 40 nm (3σ < 390 nm) for serial device integration of both thin film silicon membranes and single nanowire devices. Parallel transfer of devices across a 2 x 2 mm2 area is demonstrated with an average offset of < 30 nm (3σ < 705 nm). Rotational accuracy better than 45 mrad is achieved for all device variants. Devices can be selected and placed with high accuracy on a target substrate, both from lithographically defined positions on their native substrate, or from a randomly distributed population. These demonstrations pave the way for future scalable manufacturing of heterogeneously integrated chip systems.
Semiconductor nanowire (NW) lasers are a promising technology for the realisation of coherent optical sources with ultrasmall footprint. To fully realize their potential in on-chip photonic systems, scalable methods are required for dealing with large populations of inhomogeneous devices that are typically randomly distributed on host substrates. In this work two complementary, high-throughput techniques are combined: the characterisation of nanowire laser populations using automated optical microscopy, and a high accuracy transfer printing process with automatic device spatial registration and transfer. Here a population of NW lasers is characterised, binned by threshold energy density and subsequently printed in arrays onto a secondary substrate. Statistical analysis of the transferred and control devices show that the transfer process does not incur measurable laser damage and the threshold binning can be maintained. Analysis on the threshold and mode spectra of the device populations proves the potential for using NW lasers for integrated systems fabrication.