The heterogeneous integration of micro and nanoscale devices with on-chip circuits and waveguide platforms is a key enabling technology, with wide-ranging applications in areas including telecommunications, quantum information processing and sensing. Pick and place integration with absolute positional accuracy at the nanoscale has been previously demonstrated for single proof of principle devices. However, to enable scaling of this technology for realisation of multi-element systems, or high throughput manufacturing, the integration process must be compatible with automation whilst retaining nanoscale accuracy. In this work, an automated transfer printing process is realised using a simple optical microscope, computer vision and high accuracy translational stage system. Automatic alignment using a cross-correlation image processing method demonstrates absolute positional accuracy of transfer with an average offset of < 40 nm (3σ < 390 nm) for serial device integration of both thin film silicon membranes and single nanowire devices. Parallel transfer of devices across a 2 x 2 mm2 area is demonstrated with an average offset of < 30 nm (3σ < 705 nm). Rotational accuracy better than 45 mrad is achieved for all device variants. Devices can be selected and placed with high accuracy on a target substrate, both from lithographically defined positions on their native substrate, or from a randomly distributed population. These demonstrations pave the way for future scalable manufacturing of heterogeneously integrated chip systems.
A transfer printing (TP) method is presented for the micro-assembly of integrated photonic devices from suspended membrane components. Ultra thin membranes with thickness of 150nm are directly printed without the use of mechanical support and adhesion layers. By using a correlation alignment scheme vertical integration of single-mode silicon waveguides is achieved with an average placement accuracy of 100±70nm. Silicon (Si) μ-ring resonators are also fabricated and show controllable optical coupling by varying the lateral absolute position to an underlying Si bus waveguide.
Semiconductor nanowire (NW) lasers are a promising technology for the realisation of coherent optical sources with ultrasmall footprint. To fully realize their potential in on-chip photonic systems, scalable methods are required for dealing with large populations of inhomogeneous devices that are typically randomly distributed on host substrates. In this work two complementary, high-throughput techniques are combined: the characterisation of nanowire laser populations using automated optical microscopy, and a high accuracy transfer printing process with automatic device spatial registration and transfer. Here a population of NW lasers is characterised, binned by threshold energy density and subsequently printed in arrays onto a secondary substrate. Statistical analysis of the transferred and control devices show that the transfer process does not incur measurable laser damage and the threshold binning can be maintained. Analysis on the threshold and mode spectra of the device populations proves the potential for using NW lasers for integrated systems fabrication.
Hybrid integration of a III-V microdisk resonator on a silicon-on-insulator waveguide platform is demonstrated. Transfer printing with nanoscale accuracy is used to micro-assemble an evanescently coupled all-pass microdisk resonator with a targeted coupler gap of 100 nm using pre-fabricated AlGaAs and silicon components. Transmission measurements show hybrid resonances with a loaded -factor of and a cavity finesse of over 100.
The heterogeneous integration of devices from multiple material platforms onto a single chip is demonstrated using a transfer-printing (TP) technique. Serial printing of devices in spatially dense arrangements requires that subsequent processes do not disturb previously printed components, even in the case where the print head is in contact with those devices. In this manuscript we show the deterministic integration of components within a footprint of the order of the device size, including AlGaAs, diamond and GaN waveguide resonators integrated onto a single chip. Serial integration of semiconductor nanowire (NW) using GaAs/AlGaAs and InP lasers is also demonstrated with device to device spacing in the 1 μm range.