25 March 2024 in IEEE Transactions on Sustainable Energy
Hydrogen electrolyzers are promising tools for frequency regulation of future power systems with high penetration of renewable energies and low inertia. This is due to both the increasing demand for hydrogen and their flexibility as controllable load. The two main electrolyzer technologies are Alkaline Electrolyzers (AELs) and Proton Exchange Membrane Electrolyzers (PEMELs). However, they have trade-offs: dynamic response speed for AELs, and cost for PEMELs. This paper proposes the combination of both technologies into a Hybrid Hydrogen Electrolyzer System (HHES) to obtain a fast response for frequency regulation with reduced costs. A decentralized dynamic power sharing control strategy is proposed where PEMELs respond to the fast component of the frequency deviation, and AELs respond to the slow component, without the requirement of communication. The proposed decentralized approach facilitates a high reliability and scalability of the system, what is essential for expansion of hydrogen production. The effectiveness of the proposed strategy is validated in simulations and experimental results.
1 July 2021 in Fusion Engineering and Design
1 October 2021 in Fusion Engineering and Design
1 October 2021 in Fusion Engineering and Design
28 January 2025 in IEEE Transactions on Industrial Electronics
Large-scale hydrogen electrolyzers for hard-to-abate industries, such as steel industry, have the potential to be an essential tool of demand response in low inertial power systems with high shares of renewable energies. Their flexibility comes from the possibility to store hydrogen, decoupling electric consumption from hydrogen demand. Therefore, they can help in the integration of more renewable energies by the provision of grid services, such as frequency regulation. Alkaline electrolyzers (AELs) are the most mature and cost effective technology for large-scale hydrogen applications. However, their slow dynamics do not allow a fast response. Therefore, their combination with energy storage systems (ESSs) into hybrid hydrogen systems (HHSs) enhances their flexibility and fast response for frequency regulation. Supercapacitors (SCs) are suitable ESS technology in this application due to the high power and low energy required. A decentralized dynamic power sharing control is proposed for an AEL/SC HHS to provide frequency regulation with scalability. The control strategy respects the slow dynamics of the AEL, while the use of the SC is optimized by the automatic recovery of the dc bus voltage and SC state of charge (SoC). The decentralized approach of the control strategy enables easy expansion of the system, essential for large-scale hydrogen systems. The effectiveness of the method in large-scale power systems, as well as its scalability is shown in simulation results. The control strategy is validated with experimental results.
26 November 2025 in IEEE Transactions on Industrial Electronics
Large-scale water electrolyzers have the ability to operate as flexible loads, absorbing power fluctuations in power systems with high or full share of variable renewable energy sources (VRESs). For large-scale industrial applications, alkaline water electrolyzers (AWEs) and thyristor-based power converter topologies are commonly used due to their lower cost compared to proton exchange membrane water electrolyzers (PEMWEs) and transistor-based topologies. However, thyristor-rectifiers have a significant ripple when operated at partial load. A wide operational range is required when electrolyzers operate in a flexible manner, and large current ripples due to the power converter topology increase the power losses in the electrolyzer. Therefore, it is essential to study the impact of the current ripple on AWE performance. This article proposes an evaluation approach to systematically assess the impact of different power converter topologies on AWE losses, including an electrolyzer model for power electronic applications and experimental verification. Realistic current waveforms for industrial applications are obtained from a simulated large-scale electrolyzer system, and these waveforms are tested in a small-scale experimental setup. The experimental results validate the large-scale system simulations and the proposed model and provide quantitative assessment of AWE losses caused by the current ripple. The results also show that the six-pulse thyristor rectifier has the highest current ripples, causing the highest additional losses in the electrolyzer.