Carbon cryogel/ceria composite, with 10 wt.% of ceria, was synthesized by mixing of ceria and carbon cryogel (CC). The sample was characterized by field emission scanning electron microscopy, nitrogen adsorption and X-ray diffraction. The adsorption of arsenic(III) ions from aqueous solutions on carbon cryogel/ceria nanocomposite was studied as a function of time, solution pH and As(III) ion concentration. The results are correlated with previous investigations of adsorption mechanism of arsenic(III) on carbon cryogel. Adsorption dose experiments showed that the mass of the adsorbent was reduced for 20 times, in comparison with pure CC, for the same amount of adsorbed arsenic(III) ions. BET isotherm was used to interpret the experimental data for modelling liquid phase adsorption.
Resorcinol-formaldehyde carbon cryogel has been prepared, characterized and used for the removal of commonly used herbicide clopyralid from the aqueous solutions under varying experimental conditions. Carbon has shown a relatively high specific surface area, significant mesoporosity and an amorphous structure. A set of the following isotherm models has been used to interpret the equilibrium data: Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Jovanovic, Hurkins-Jura, and Helsey model. Several models have fitted well although the calculated values for qmax poorly correlate with the data obtained experimentally. The kinetic models of the pseudo-first and pseudo-second-order, the models of Elovich, Bangham and the intraparticle diffusion model have been used for fitting the kinetic data. The rate of the process is fast in the beginning while adsorption equilibrium is attained not until 24 hours. Adsorption was found to be pH dependent and favored in acidic solutions.
1 January 2011 in Processing and Application of Ceramics
A novel method for synthesis of carbon cryogel/zeolite composites was obtained. Method considers forming of carbon cryogel from the sol-gel polycondenzation of resorcinol and formaldehyde, followed by freeze drying, and subsequent pyrolysis in presence of different amount of zeolite. Characterization of composite materials by nitrogen adsorption shows that samples are micro- and mesoporous and that specific surface area decrease with increasing the amount of zeolite in samples. XRD method confirms amorphous structure of carbon cryogel and crystalline structure of zeolite, i.e. structure of zeolite has not been destroyed by carbonization process. SEM and EDX analyses reveal homogenous distribution of zeolite through out carbon cryogel and corresponding composition.
1 January 2009 in Processing and Application of Ceramics
Tilia wood was transformed by pyrolysis into carbon preform. This porous carbon preform was infiltrated with TEOS (Si(OC2H5)4), as a source of silica. In situ reaction between the silica and the carbon template occurred in the cellular wall at a hight temperature. Depending on the applied atmosphere, non-oxide (SiC) or oxide (SiO2) ceramics were obtained. Scanning electron microscopy (SEM), X-ray diffraction (XRD), infrared (IR) spectroscopy, mercury porosimetry and BET measurements were employed to characterize the phases and crystal structure of biomorphic ceramics. The experimental results showed that the biomorphic cellular morphology of the wood maintained in both the SiC and SiO2 ceramics, wich consisted of ?-SiC with trace of ?-SiC and SiO2, respectively. .