10 July 2019 in IEEE Antennas and Wireless Propagation Letters
This letter presents our design and experimental verification of a wideband dual-circular-polarized antenna operating in the W-band based on an optimized waveguide septum polarizer and a profiled smooth-wall horn. This antenna is capable of transmitting and receiving two orthogonal circular-polarized signals [left-hand circular polarization (LHCP) and right-hand circular polarization (RHCP)] simultaneously to achieve full-duplex, hence, twofold spectrum efficiency for millimeter-wave (mmWave) wireless communications. The fabricated antenna shows 21% relative bandwidth from 76.8 to 94.7 GHz with axial ratio 20 dB for both LHCP and RHCP.
14 October 2021 in IEEE Transactions on Antennas and Propagation
This article presents a wideband dual-circular-polarization (dual-CP) antenna with high port isolation based on a grooved-wall CP horn combined with an orthomode transducer (OMT) in the W-band. A pair of grooves on the inner wall of the horn serves as an inbuilt polarizer within the horn antenna, which is capable of generating both left-hand circular polarization (LHCP) and right-hand circular polarization (RHCP) without any septum. The continuous linearly tapered groove design also allows this multisection grooved-wall CP horn to achieve low reflection coefficients over a wide bandwidth, thereby realizing wideband dual-CP with high port isolation when it is used together with a wideband OMT. A prototype of the proposed dual-CP antenna is designed in simulation and measured in an experiment. The simulated and measured results agree very well, showing that port isolation >32.5 dB over 31.6% bandwidth from 80 to 110 GHz is achieved with axial ratio (AR) < 2.8 dB and reflection coefficient $< -20$ dB for both LHCP and RHCP. Rotationally symmetric radiation patterns over the entire operating bandwidth are also observed with a measured gain of 19.6 ± 2 dBic.
23 September 2021 in IEEE Transactions on Microwave Theory and Techniques
This article proposes an advanced THz multiple-input-multiple-output (MIMO) near-field sparse imaging scheme for target detection that uses single-pass synthetic aperture focusing and multipass interferometric synthetic aperture focusing techniques to improve imaging effectiveness and efficiency. It benefits from the MIMO of the linear sparse periodic array (SPA) and random undersampling sparse imaging to reduce sampling data and system cost. Both simulated and proof-of-concept experimental results have verified the scheme, revealing that the single-pass synthetic aperture imaging approach is sufficient to identify pure metallic targets with 3.87% of λ/2 sampling data. The multipass interferometric synthetic aperture imaging approach is capable of improving image quality on the image signal-to-noise ratio (SNR) and contrast, which is ideal for detecting more challenging targets. The random sparse imaging with help of the low-rank matrix completion (LRMC) technique has shown the promising potential of achieving equivalent image quality when further reducing 43.75% data in the experiment of five-pass imaging on a complex target; this corresponds to 82.51% data reduction compared to λ/2 sampling.
10 December 2019 in IEEE Sensors Journal
13 April 2023 in IEEE Transactions on Microwave Theory and Techniques
This article presents our study on a wideband miniaturized 4 $\times$ 8 Butler matrix (BM) beamforming network based on a stacked metallic waveguide layout in millimeter-wave band. The size and complexity of the 4 $\times$ 8 BM have been substantially reduced by introducing a double-layer structure to avoid eight cross-overs and by using reverse feeding to eliminate four band limiting 180 $^{\circ}$ phase shifters. Additionally, by introducing two kinds of wideband hybrid couplers in $H$ -plane and $E$ -plane and a broadband 45 $^{\circ}$ phase shifter realized by loading inductive and capacitive irises in both paths, the operating bandwidth of the proposed 4 $\times$ 8 BM has been substantially increased. Furthermore, a Chebyshev amplitude distribution among the eight outputs has been realized through the unequal power dividers to suppress the sidelobes. The beamforming network and magnetoelectric (ME)-dipole array have been verified in the experiment, showing an operating bandwidth of 60–80 GHz with $S_{\mathrm{11}}< -15$ dB. The sidelobe of the radiation pattern is below $-$ 14 dB at 70 GHz and the peak gain is 18 dBi in the operating band. The beam switching angles are $\pm$ 11 $^{\circ}$ and $\pm$ 35 $^{\circ}$ for each port, respectively. Compared with the reported similar work on 4 $\times$ 8 BM, the bandwidth is increased by threefold and the size is reduced by more than 50%.
28 November 2019 in IEEE Access
This paper presents our study on a W band imaging system consisting of a linear sparse periodic antenna array (SPA) with only 10 transmitting (Tx) and 10 receiving (Rx) elements in simulation and experiment for the purpose of personnel screening. We have devised a simplified and low cost experimental set-up using only 1 Tx and 1 Rx channels located on two scanning tracks separated by a distance to verify the proposed multi-static array imaging scheme. The simulation has taken account of the effects of track separation and measured antenna patterns. The simulation and experiment correlate quite well, indicating a resolution of about 7 mm at 1.3 m distance. Furthermore, based on the experimental data, we have investigated the compressive sensing (CS) image reconstruction as an approach for further reducing the sampling points in such a multi-static array imaging system. It is shown that using a discrete SPA-CS imaging algorithm, the images can be successfully reconstructed with the data as few as 30% of that used in the traditional holographic/synthetic aperture radar (SAR) imaging algorithm. Therefore, the CS image reconstruction is proved to be feasible for building a low-cost and fast millimeter wave imaging system.