SUMMARY: Determining a detailed 3-D velocity model with high resolution for the sedimentary layer in the Sichuan Basin is potentially beneficial both to the industrial oil/gas exploration and earthquake hazards’ mitigation. In this study, we apply the ambient noise tomography method to construct a 3-D S-wave velocity model. This model focuses on the sedimentary layer of the Sichuan Basin, with a 0.3° × 0.3° grid precision. Dispersion curves of both group and phase velocities of Rayleigh wave at 4 to 40 s periods are utilized, which are extracted from 87 broad-band stations in the Sichuan Basin and the surrounding areas. The 3-D model reveals a thick sedimentary layer of the Sichuan Basin with S-wave velocity ranging from ∼2.0 to 3.4 km s−1. The sediment thickness in the margins of the Sichuan Basin is generally greater than the typical values of 6–10 km in the central areas due to surrounding orogenic activities, with a maximum depth of ∼13 km in the northwestern margin. Moreover, a prominent low S-wave velocity anomaly in the margins may be caused by the sediment accumulations from large-scale landslides and pronounced denudation of the surrounding orogenic belts. Major geologic units in the sedimentary layer are delineated in this study. The S-wave velocity values within each geologic unit and their bottom interfaces are obtained. Based on our model, we calculate synthetic ground motions for the 2013 Lushan earthquake and obtain the distribution of the peak ground acceleration from the earthquake epicentre to the western Sichuan Basin. The result clearly illustrates the basin amplification effect on the seismic waves.
15 December 2021 in Seismological Research Letters
Aftershock‐monitoring networks deployed in the epicentral area of a damaging earthquake play important roles in earthquake early warning and ShakeMap estimation, which contribute to hazard mitigation. Using distributed acoustic sensing (DAS) technology with dark fiber can significantly reduce deployment time and cost, and improve spatial sampling, both of which help capture more aftershocks. In this study, we used a 7.6 km dark fiber in Tangshan, China, to monitor seismicity after the 12 July 2020 5.1 earthquake. The DAS array detected dozens of earthquakes missed by the local permanent network that doubled the number of aftershocks. The relocated aftershocks are distributed mainly north of the DAS array, and the ground‐motion pattern changes also hint small‐scale features. Our successful results demonstrate the feasibility of using DAS and dark fiber for rapid postearthquake response.
1 November 2019 in Journal of Asian Earth Sciences
The Gonghe Basin in the northeast Tibetan Plateau presents significant potential for hot dry rock (HDR) geothermal resources. A 1990 Mw 6.4 earthquake in the basin furthers the need for an improved understanding of its sedimentary structure. In this study, we utilize data from a dense seismic array of 88 short-period seismometers deployed at an interstation spacing of approximately 3 km to scrutinize the sedimentary structure of the Gonghe Basin. By analyzing teleseismic P waveforms, we identify P-to-S converted waves (Ps-wave) originating from the sedimentary basement. We then determine the delay time between the Ps-waves and the direct P waves (P-wave) through waveform cross-correlation. By integrating this delay time with empirical velocity structure models, HDR borehole data, and results from teleseismic receiver function analysis, we derive a sediment thickness model of the Gonghe Basin for the Qabqa geothermal area. Our findings reveal a gradual increase in sediment thickness from around 500 m in the east to approximately 3000 m in the west, which is consistent with other geophysical surveys and borehole data. The thick sediments in the basin could potentially serve as an excellent thermal storage cover for HDR. The strong ground motion simulation using our sediment thickness model shows that thick sediments can amplify seismic waves, increasing the risk of seismic hazards. Moreover, our study indicates that the clear Ps-waves can be effectively extracted to construct a dependable sediment thickness model using teleseismic P-waves recorded by a short-period dense seismic array.
A pair of small earthquakes ( 2.4 and 2.6, Earthquakes Canada) hit the city of Dartmouth, Nova Scotia, Canada, in early March 2020. The events were recorded by three seismic stations within 200 km, but only one station (HAL, ) is close enough to offer high‐quality broadband signals. In this study, we explore their source parameters using the nearest station through waveform modeling. A nearby quarry blast ( 2.0) with known Global Positioning System coordinates is adopted as a reference for regional velocity model building and location calibration. We first build a half‐space velocity model by estimating the P‐S travel‐time difference of the blast and determine the near‐surface velocity through full‐waveform modeling (i.e., comparing a set of synthetic waveforms with the observed blast). The velocity model is then used to evaluate the pair of earthquakes, in which waveform fitting and Rg/S amplitude ratios suggest source depths of . The epicenters of these two earthquakes are situated in a recently constructed commercial development. Lastly, single‐station template matching finds no similar earthquakes near the hypocenters of the two events in the past decade and only three aftershocks in the following four months. Taking advantage of a ground‐truth blast and waveform modeling, our study demonstrates the potential to construct a detailed regional velocity model and determine accurate earthquake source parameters in regions where only a single station is available.