5 June 2015 in IEEE Transactions on Plasma Science
High-voltage, nanosecond, high-repetitive-frequency, and portable pulse generators are always required in many fields. Avalanche transistor-based Marx circuits have been widely studied to generate pulses satisfying the above requirements. However, the basic topology of an avalanche transistor-based circuit, configuration of circuit parameters, and optimal working performance (including output impedance matching) were still scarcely discussed. In this paper, the detailed process of analyzing and designing a compact Marx generator using avalanche transistors was described. Based on the conventional principles of avalanche transistors and Marx circuit, a list of useful and interesting conclusions was discovered by experiment. An example with specific parameter requirements was utilized for the clearness of illustration. The 12 cm × 4 cm Marx circuit could finally generate pulses with a 2.5-kV amplitude, 6.0-ns width, 10-kHz repetitive frequency, lower than a 100-ps jitter and ~125-kW maximum peak output power on a matched 50-Ω resistive load. The pulse amplitude could be adjusted from 1.5 to 2.5 kV and the pulse width could also be broadened. This paper may help to provide a reference to similar methods of producing high-voltage, nanosecond, and high-repetitive-frequency pulses.
1 September 2015 in Review of Scientific Instruments
Avalanche transistors have been widely studied and used in nanosecond high voltage pulse generations. However, output power improvement is always limited by the low thermal capacities of avalanche transistors, especially under high repetitive working frequency. Parallel stacked transistors can effectively improve the output current but the controlling of trigger and output synchronism has always been a hard and complex work. In this paper, a novel stereo-symmetrical nanosecond pulsed power generator with high reliability was developed. By analyzing and testing the special performances of the combined Marx circuits, numbers of meaningful conclusions on the pulse amplitude, pulse back edge, and output impedance were drawn. The combining synchronism of the generator was confirmed excellent and lower conducting current through the transistors was realized. Experimental results showed that, on a 50 Ω resistive load, pulses with 1.5–5.2 kV amplitude and 5.3–14.0 ns width could be flexibly generated by adjusting the number of combined modules, the supply voltage, and the module type.
2 December 2014 in IEEE Transactions on Magnetics
Hyperthermia is the therapy heating of certain organs or tissues to temperature 41 °C~46 °C for cancer treatment. Magnetic fluid hyperthermia, based on magnetic inductive heating (MIH) and proposed using magnetic particles as the heat mediator, is one potential treatment with great advantages and has attracted much attention in recent years. Among various kinds of magnetic materials, ferric oxide nanoparticles, such as Fe 3 O 4 , are widely used because of their excellent biocompatibility and easy preparation method. Considering that the working mechanism and heating properties are not fully understood, this paper studied the thermal characteristics of Fe 3 O 4 nanoparticles mixed with gelatin under a radiofrequency magnetic field. After analyzing thermal physics and electromagnetic property, the relationship between heating power and parameters, including particle concentration, magnetic field intensity, and field frequency, was found in accordance with the power loss formula of a ferromagnet in a alternating magnetic field.