LoRa is a chirp spread-spectrum modulation developed for the Internet of Things. In this work, we examine the performance of LoRa in the presence of both additive white Gaussian noise and interference from another LoRa user. To this end, we extend an existing interference model, which assumes perfect alignment of the signal of interest and the interference, to the more realistic case where the interfering user is neither chip-nor phase-aligned with the signal of interest and we derive an expression for the error rate. We show that the existing aligned interference model overestimates the effect of interference on the error rate. Moreover, we prove two symmetries in the interfering signal and we derive low-complexity approximate formulas that can significantly reduce the complexity of computing the symbol and frame error rates compared to the complete expression. Finally, we provide numerical simulations to corroborate the theoretical analysis and to verify the accuracy of our proposed approximations.
19 January 2021 in IEEE Transactions on Vehicular Technology
In the Shannon lecture at the 2019 International Symposium on Information Theory (ISIT), Arıkan proposed to employ a one-to-one convolutional transform as a pre-coding step before the polar transform. The resulting codes of this concatenation are called polarization-adjusted convolutional (PAC) codes . In this scheme, a pair of polar mapper and demapper as pre- and post- processing devices are deployed around a memoryless channel, which provides polarized information to an outer decoder leading to improved error correction performance of the outer code. In this paper, the list decoding and sequential decoding (including Fano decoding and stack decoding) are first adapted for use to decode PAC codes. Then, to reduce the complexity of sequential decoding of PAC/polar codes, we propose (i) an adaptive heuristic metric, (ii) tree search constraints for backtracking to avoid exploration of unlikely sub-paths, and (iii) tree search strategies consistent with the pattern of error occurrence in polar codes. These contribute to the reduction of the average decoding time complexity from 50% to 80%, trading with 0.05 to 0.3 dB degradation in error correction performance within FER = $10^{-3}$ range, respectively, relative to not applying the corresponding search strategies. Additionally, as an important ingredient in Fano decoding of PAC/polar codes, an efficient computation method for the intermediate LLRs and partial sums is provided. This method is effective in backtracking and avoids storing the intermediate information or restarting the decoding process. Eventually, all three decoding algorithms are compared in terms of performance, complexity, and resource requirements.
4 June 2020 in IEEE Journal on Emerging and Selected Topics in Circuits and Systems
The communication industry is rapidly advancing towards 5G and beyond 5G (B5G) wireless technologies in order to fulfill the ever-growing needs for higher data rates and improved quality-of-service (QoS). Emerging applications require wireless connectivity with tremendously increased data rates, substantially reduced latency, and growing support for a large number of devices. These requirements pose new challenges that can no longer be efficiently addressed by conventional approaches. Artificial intelligence (AI) is considered as one of the most promising solutions to improve the performance and robustness of 5G and B5G systems, fueled by the massive amount of data generated in 5G and B5G networks and the availability of powerful data processing fabrics. As a consequence, a plethora of research on AI-based communication technologies has emerged recently, promising higher data rates and improved QoS with affordable implementation overhead. In this overview paper, we summarize the state-of-the-art of AI-based 5G and B5G techniques on the algorithm, implementation, and optimization levels. We shed light on the advantages and limitations of AI-based solutions, and we provide a summary of emerging techniques and open research problems.
11 February 2021 in IEEE Internet of Things Journal
It has been shown that the coherent detection of LoRa signals only provides marginal gains of around 0.7 dB on the additive white Gaussian noise (AWGN) channel. However, ALOHA-based massive Internet of Things systems, including LoRa, often operate in the interference-limited regime. Therefore, in this work, we examine the performance of the LoRa modulation with coherent detection in the presence of interference from another LoRa user with the same spreading factor. We derive rigorous symbol-and frame error rate expressions as well as bounds and approximations for evaluating the error rates. The error rates predicted by these approximations are compared against error rates found by Monte Carlo simulations and shown to be very accurate. We also compare the performance of LoRa with coherent and non-coherent receivers and we show that the coherent detection of LoRa is significantly more beneficial in interference scenarios than in the presence of only AWGN. For example, we show that coherent detection leads to a 2.5 dB gain over the standard non-coherent detection for a signal-to-interference ratio (SIR) of 3 dB and up to a 10 dB gain for an SIR of 0 dB. Moreover, we show that with coherent detection it is easier to obtain useful and relevant frame error rate values even for negative SIR values.
25 October 2022 in IEEE Transactions on Signal Processing
Due to the low-latency and high-reliability requirements of 5G, low-complexity node-based successive cancellation list (SCL) decoding has received considerable attention for use in 5G communications systems. By identifying special constituent codes in the decoding tree and immediately decoding these, node-based SCL decoding provides a significant reduction in decoding latency compared to conventional SCL decoding. However, while there exists many types of nodes, the current node-based SCL decoders are limited by the lack of a more generalized node that can efficiently decode a larger number of different constituent codes to further reduce the decoding time. In this paper, we extend a recent generalized node, the sequence repetition (SR) node, to SCL decoding, and describe the first implementation of an SR-List decoder. By merging certain SR-List decoding operations and applying various optimizations for 5G New Radio (NR) polar codes, our optimized SR-List decoding algorithm increases the throughput by almost $\bm {2\times }$ compared to a similar state-of-the-art node-based SCL decoder. We also present our hardware implementation of the optimized SR-List decoding algorithm which supports all 5G NR polar codes. Synthesis results show that our SR-List decoder can achieve a $2.94 \,\mathrm{Gbps}$ throughput and $6.70 \,\mathrm{Gbps}\mathrm{m}^{-1}\,\mathrm{m}^{2}\,$ area efficiency for $\bm {L=8}$ .
Wireless sensor nodes (WSNs) are generally powered by batteries, which results in a substantial limitation to the places where the nodes can be installed, to the maximum number of deployable devices, and to the node lifetime. To meet the demand for Internet-of-Things (IoT) applications that require a large number of maintenance-free, low cost, wireless sensor nodes, this paper proposes a wireless sensor platform with a single photovoltaic transducer that performs the dual role of harvesting energy and sensing ambient light. This dual use allows even smaller and cheaper nodes that do not require any form of supporting external power, with a reduced component count. The device implements off-the-shelf components on a 2 x 2cm2 printed circuit board (PCB) with a thickness of 0.45 cm. It features Bluetooth Low Energy (BLE) communication and can harvest and sense indoor ambient light with a limit of detection of 200 lux.