11 February 2021 in IEEE Internet of Things Journal
It has been shown that the coherent detection of LoRa signals only provides marginal gains of around 0.7 dB on the additive white Gaussian noise (AWGN) channel. However, ALOHA-based massive Internet of Things systems, including LoRa, often operate in the interference-limited regime. Therefore, in this work, we examine the performance of the LoRa modulation with coherent detection in the presence of interference from another LoRa user with the same spreading factor. We derive rigorous symbol-and frame error rate expressions as well as bounds and approximations for evaluating the error rates. The error rates predicted by these approximations are compared against error rates found by Monte Carlo simulations and shown to be very accurate. We also compare the performance of LoRa with coherent and non-coherent receivers and we show that the coherent detection of LoRa is significantly more beneficial in interference scenarios than in the presence of only AWGN. For example, we show that coherent detection leads to a 2.5 dB gain over the standard non-coherent detection for a signal-to-interference ratio (SIR) of 3 dB and up to a 10 dB gain for an SIR of 0 dB. Moreover, we show that with coherent detection it is easier to obtain useful and relevant frame error rate values even for negative SIR values.
28 June 2022 in IEEE Internet of Things Journal
Long Range (LoRa) is an emerging low-power wide-area network technology offering long-range wireless connectivity to Internet of Things (IoT) devices. For energy efficiency reasons, LoRa end nodes implement a nonslotted ALOHA multiple access scheme to transmit packets to the gateway. Due to the lack of synchronization between end nodes, collisions between uplink packets have been identified as the main obstacle to the scaling of dense LoRa networks. To tackle this issue, we present in this article a LoRa receiver that is capable of decoding colliding packets from two interfering end nodes. The proposed two-user detector is derived from the maximum-likelihood principle using a detailed model of two colliding LoRa packets. As the complexity of the maximum-likelihood sequence estimation is prohibitive, complexity-reduction techniques are introduced to enable practical implementations of the receiver. An in-depth performance analysis highlights that the proposed two-user detector inherently leverages the differences in received power, time offsets, and frequency offsets between the users to separate and demodulate their respective signals. To demonstrate the practicality of the proposed detector, an interference-robust synchronization algorithm is then designed and evaluated. Simulation results indicate that a LoRa receiver combining the proposed synchronization algorithm and two-user detector is capable of detecting and demodulating two interfering users with satisfactorily error rates.
9 December 2021 in IEEE Open Journal of the Communications Society
LoRaWAN is a low-power wireless technology that provides long-range connectivity to battery-powered Internet of things (IoT) devices. To minimize the energy consumption of the IoT nodes, LoRaWAN networks use for the uplink a pure non-slotted ALOHA multiple access scheme. Since the devices are not synchronized in time, collisions between uplink packets are the main source of errors when the number of nodes becomes important. To improve the reliability of dense LoRaWAN networks, we propose in this paper a successive interference cancellation LoRa receiver capable of decoding frames from two colliding users. The proposed two-user detector leverages the bit-interleaved coded modulation scheme of LoRa to improve the detection and cancellation of the strongest interfering user. We show that in the presence of two interfering users, the usage of a low coding-rate and iterative soft-detection are essential to attain error rates sufficiently close to the single-user scenario. Using network-level simulations, we subsequently evaluate the gains of our proposed two-user receiver in a realistic LoRaWAN network. To this end, we build advanced models of the studied receivers using Monte-Carlo simulations at the physical layer. For an overall packet error rate of 1%, simulation results indicate that a LoRaWAN network employing our two-user detector may serve 4.7 times more devices than a network with only a single-user receiver at the gateway.
1 January 2026 in IEEE Open Journal of the Communications Society