25 March 2024 in IEEE Transactions on Wireless Communications
In this paper, we propose a practical integrated sensing and communications (ISAC) framework to sense dynamic targets from clutter environment while ensuring users communications quality. To implement communications function and sensing function simultaneously, we design multiple communications beams that can communicate with the users as well as one sensing beam that can rotate and scan the entire space. To minimize the interference of sensing beam on existing communications systems, we divide the service area into sensing beam for sensing (S4S) sector and communications beam for sensing (C4S) sector , and provide beamforming design and power allocation optimization strategies for each type sector. Unlike most existing ISAC studies that ignore the interference of static environmental clutter on target sensing, we construct a mixed sensing channel model that includes both static environment and dynamic targets. When base station receives the echo signals, it first filters out the interference from static environmental clutter and extracts the effective dynamic target echoes. Then a complete and practical dynamic target sensing scheme is designed to detect the presence of dynamic targets and to estimate their angles, distances, and velocities. In particular, dynamic target detection and angle estimation are realized through angle-Doppler spectrum estimation (ADSE) and joint detection over multiple subcarriers (MSJD), while distance and velocity estimation are realized through the extended subspace algorithm. Simulation results demonstrate the effectiveness of the proposed scheme and its superiority over the existing methods that ignore environmental clutter.
18 July 2023 in IEEE Internet of Things Journal
This article explores a new secure wireless communication scenario for the data collection in the Internet of Things (IoT) where the physical layer security technology is applied to counteract both the detection and eavesdropping attacks, such that the critical covertness and secrecy properties of the communication are jointly guaranteed. We first provide theoretical modeling for covertness outage probability (COP), secrecy outage probability (SOP), and transmission probability (TP) to depict the covertness, secrecy, and transmission performances of the wireless communication system. To understand the fundamental security performance under the wireless communication system, we then define a new metric—covert secrecy rate (CSR), which characterizes the maximum transmission rate subject to the constraints of COP, SOP, and TP. We further conduct a detailed theoretical analysis to identify the CSR under various scenarios determined by the detector-eavesdropper relationships and the secure transmission schemes adopted by transmitters. Finally, numerical results are provided to illustrate the achievable performances under the secure wireless communication system.
8 March 2024 in IEEE Transactions on Mobile Computing
This paper investigates the fundamental covert rate performance in a D2D-enabled cellular network consisting of a cellular user Alice, a base station BS, an active warden Willie, and a D2D pair with a transmitter $D_{t}$ and a full-duplex receiver $D_{r}$ . To conduct covert communication between Alice and BS, the full-duplex $D_{r}$ transmits jamming signal to confuse the active Willie and also receives signal from $D_{t}$ simultaneously. With spectrum sharing, $D_{t}$ can operate over either an underlay mode reusing cellular spectrum or an overlay mode using dedicated spectrum. With power control, $D_{r}$ can send jamming signal to confuse Willie's detection of the transmission from Alice. We first provide theoretical results for the outage probabilities of the cellular and D2D transmissions, the average minimum detection error probability at Willie, and the achievable covert rate from Alice to BS. We then explore the power control for covert rate maximization (CRM) under the underlay mode as well as the joint designs of power control and spectrum partition for CRM under the overlay mode. We further consider a mode selection that flexibly switches between these two modes with a probability, and also investigate the covert rate modeling and joint designs of power control, spectrum partition and mode selection probability for CRM. Finally, numerical results are presented to illustrate the covert rate performances of the network under the underlay mode, overlay mode and mode selection.
5 December 2024 in IEEE Transactions on Communications
This paper investigates the joint relay and transmission mode selection for covert communication in a wireless relay system with amplify-and-forward (AF) forwarding mode, which consists of one source, multiple AF relays, one destination, one friendly jammer and one warden, and each relay can switch between the half-duplex (HD) and full-duplex (FD) transmission modes. We first explore the fundamental covert performance of the system when it works in either the fixed HD or fixed FD mode. Based on this result, we then investigate the covert performance of the system with optimal (resp. random) relay selection and random (resp. optimal) mode selection, so as to reveal the achievable covert performance in the system with solely the relay selection or mode selection. Building upon above results, we further design the optimal joint relay and mode selection scheme, and develop related theoretical models for performance analysis. Finally, we provide extensive numerical results to conduct a comprehensive comparison between the relay selection and mode selection on their achievable covert performance and to illustrate the performance enhancement from adopting the joint relay and mode selection in the relay system.
24 January 2025 in IEEE Transactions on Wireless Communications
In this paper, we study the deep learning (DL) based channel extrapolation problem and conduct the over-the-air (OTA) antenna extrapolation and frequency channel interpolation test for the 3rd generation partnership project (3GPP) long-term evolution (LTE) time-division duplex (TDD)-like orthogonal frequency division multiplexing (OFDM) massive MIMO prototype.We first present measurement campaigns using universal software radio peripherals (USRP) at 3.5 GHz, where the base station (BS) is composed of a 64-element antenna array. A DL-based antenna extrapolation network is then designed to approximate the inner deterministic function among antennas from the attained channel data within the “training” pilots. We present an antenna selection network (ASN) that can select a limited number of antennas for the best extrapolation, which outperforms the uniform antenna selection in terms of channel reconstruction and signal detection. We also design a deep residual neural network for channel interpolation. The performance of the extrapolated channel is evaluated in terms of normalized mean squared error (NMSE) in comparison to the measured channels on all antenna ports or the full pilot-aided channels in all OFDM subcarriers. Experimental results show that ASN can reduce an average of 87.5% antenna ports and maintain channel estimation NMSE by 10-2 when compared to 3GPP channel estimation protocols.
12 April 2024 in IEEE Wireless Communications Letters
In this letter, we investigate the joint beamspace waveform design and beam selection problem for lens antenna array (LAA)-assisted integrated sensing and communication (ISAC) systems. The LAA effectively reduces the number of required radio frequency (RF) chains by transforming the dense spatial domain channel into a sparse beamspace channel. We adopt a more practical power consumption model and aim to minimize the system power consumption while guaranteeing the communication and sensing performance. The system power consumption involves the l0 norm of the transmitting signal, which makes the objective intractable. To address this issue, we propose an iterative reweighting successive convex approximation (IR-SCA) algorithm, which sequentially relaxes the l0 norm to a reweighted l1 norm, and approximates the non-convex quadratic form using its first-order Taylor expansion. Simulation results convincingly demonstrate that the proposed method outperforms fully digital systems in terms of energy efficiency.