The increasing use of petroleum plastics has caused environmental damage due to the degradation time of these materials. An alternative to petroleum plastics could be thermoplastic starch (TPS). However, thermoplastic starch does not exhibit satisfactory tensile properties. The mechanical properties of thermoplastic starch can be improved by adding sisal microfibers. Thus, the objective of this study was to evaluate the influence of different levels of glycerol and sisal microfibers on the thermal and tensile properties of thermoplastic corn starch composites. The microfibers were obtained via mechanical treatment followed by chemical treatment (alkaline treatment and bleaching). The films were obtained by the casting method using commercial corn starch and glycerol as a plasticizing agent, reinforced with sisal microfibers. Fourier transform infrared spectroscopy (FTIR) results revealed that the addition of microfibers did not change the chemical structure of the TPS matrix. The films from the samples with 18% glycerol and 10% microfibers had the highest value for the maximum tension, equal to 4.78 MPa. The thermal decomposition profile of TPS was not altered by the addition of microfibers. Our findings demonstrated the profound influence of glycerol and microfiber contents on the tensile properties of thermoplastic starch composites.
1 September 2020 in Journal of Materials Research and Technology
Currently, petroleum-derived plastics are widely used despite the disadvantage of their long degradation time. Natural polymers, however, can be used as alternatives to overcome this obstacle, particularly cornstarch. The tensile properties of cornstarch films can be improved by adding plant-derived nanofibers. Sisal (Agave sisalana), a very common low-cost species in Brazil, can be used to obtain plant nanofibers. The goal of this study was to obtain sisal nanofibers using low concentrations of sulfuric acid to produce thermoplastic starch nanocomposite films. The films were produced by a casting technique using commercial corn starch, glycerol, and sisal nanofibers, accomplished by acid hydrolysis. The effects of glycerol and sisal nanofiber content on the tensile mechanical properties of the nanocomposites were investigated. Transmission electron microscopy findings demonstrated that the lowest concentration of sulfuric acid produced fibers with nanometric dimensions related to the concentrations used. X-ray diffraction revealed that the untreated fibers and fibers subjected to acid hydrolysis exhibited a crystallinity index of 61.06 and 84.44%, respectively. When the glycerol and nanofiber contents were 28 and 1%, respectively, the tensile stress and elongation were 8.02 MPa and 3.4%. In general, nanocomposites reinforced with sisal nanofibers showed lower tensile stress and higher elongation than matrices without nanofibers did. These results were attributed to the inefficient dispersion of the nanofibers in the polymer matrix. Our findings demonstrate the potential of corn starch nanocomposite films in the packaging industry.
27 March 2022 in Research, Society and Development
As indústrias de embalagens de papelão ondulado representam uma alta capacidade poluidora por utilizar tintas em seus processos de fabricação convencional. O tratamento do efluente gerado nessas indústrias deve ser eficiente, de modo a promover a remoção dos poluentes constituintes das tintas, evitando que estes cheguem aos corpos receptores. Pois, quando incorporados às águas de abastecimento ofereceram riscos à saúde. Afim de mitigar estes riscos o presente trabalho se propõe a identificar por meio de um diagnóstico aumentar a eficiência do sistema atual adotado pele estação de tratamento de efluente industrial (ETEI) de uma indústria de papel ondulado, com propósito de aumentar a qualidade do efluente final, bem como redução do custo inerente ao descarte do resíduo sólido gerado pelo tratamento (lodo). Foram realizadas intervenções de ordem física estrutural, como instalação de escadas de acesso e ampliação e manutenção de tanques, coletas na entrada e saída do sistema para análises das características físico-químicas do efluente bruto e tratado. Com implantação da proposta de otimização do sistema, teve-se aumento na velocidade e capacidade diária de tratamento, o que permitiu diminuir o acúmulo de efluente bruto em reservatório. As análises físico-químicas do efluente tratado evidenciaram que todos os parâmetros estudados inclusive de DBO e DQO estabelecido legalmente foram atingidos com o tratamento, sendo possível atender às resoluções do Conama 357/05, Art. 34 e Conama 430/11. Além disso houve em média, diminuição de 71% para cerca de 10% da umidade final do lodo e consequentemente significativa redução com os custos de descarte.
1 January 2020 in Brazilian Journal of Development
A Influência do Uso de Polietileno Tereftálico Virgem (Pet-V) e Pós-Consumo Reciclado (Pet-Pcr), nos Parâmetros de Qualidade na Produção de Embalagens Destinadas a Bebidas/ An Influence of the Use of Terephalic Virgin Polyethylene (Pet-V) and Recycled Post-Consumption (Pet-Pcr) on Quality Parameters in the Production of Beverage Packaging
Currently, petroleum-derived plastics are widely used. However, one of its main disadvantages is its low degradation time, which is not beneficial to the environment. Therefore, natural polymers are an alternative to overcome this obstacle. Among the natural polymers, starch can be highlighted. Thus, the objectives of our investigation were to obtain sisal nanofibers using low concentrations of acid solutions to produce and characterize corn starch nanocomposites reinforced with these nanofibers. The films were produced by a casting technique using commercial corn starch and glycerol as plasticizing agents; the nanofibers were obtained using acid hydrolysis. The films were subjected to tensile tests to evaluate their resulting mechanical behaviors. The results of X-ray diffraction and transmission electron microscopy analyses revealed the possibility of obtaining cellulose nanofibers using a sulfuric acid concentration lower than that previously reported in the literature. The nanocomposites reinforced with plant nanofibers showed lower tensile stress and elongation characteristics than the matrices without nanofibers.