18 March 2020 in IEEE Transactions on Industrial Electronics
This paper proposes an energy management system (EMS) for a fuel cell hybrid electric vehicle (FCHEV). The EMS is based on nonlinear model predictive control (NMPC) and employs a recurrent neural network (RNN) for modeling a proton exchange membrane (PEM) fuel cell (FC). The NMPC makes it possible the formulation of control objectives not allowed by a linear model predictive control (MPC), such as maximum efficiency point tracking (MEPT) of the FC, while the RNN can accurately predict the FC nonlinear dynamics. The EMS was implemented on a low-cost development board, and the experiments were performed in real-time on a hardware-in-the-loop (HiL) test bench equipped with a real 3 kW FC stack. The experimental results demonstrate that the NMPC EMS is able to meet the vehicle's energy demand, as well as to operate the FC in its most efficient region. Moreover, a comparative study is performed between the proposed NMPC, a linear MPC and hysteresis band control (HBC). The results of this comparative study demonstrate that the NMPC provides a better fuel economy and can reduce FC degradation.
13 March 2015 in IEEE Transactions on Industrial Electronics
LRLuis Guilherme B. Rolim
Hydrogen-related technologies have been proposed as an alternative to store the energy surplus from renewable sources. Among these technologies, the proton exchange membrane fuel cell (PEMFC) and electrolyzer are the preferred choice for practical applications since they have reached a certain level of maturity and are commercially available at present. In order to achieve a cost-effective operation, a PEMFC stack must operate at maximum efficiency most of the time. Since PEMFC stacks present a time-varying behavior, an adaptive model-based controller should be employed to accomplish this goal. A fixed-parameter electrochemical model may not offer a reliable prediction over a midterm time horizon for such a controller. For this reason, system identification techniques appear as more appropriate choices to obtain an effective model for this class of control systems. In this paper, a system identification modeling methodology employing nonlinear autoregressive with exogenous input (NARX) and nonlinear output error (NOE) neural networks is presented to obtain a black-box model of a PEMFC stack oriented for a predictive control system. The experimental data for the model development are obtained with a commercial 3-kW PEMFC stack. The model built according to the proposed methodology provides accurate predictions of the voltage for the whole operating range of the stack for a long time and, hence, the ability to represent the time-varying behavior of a PEMFC stack for a predictive control application.
1 January 2012 in Physics Procedia
Short-circuit tests and simulations carried out with a resistive SCFCL modular assembly are presented. Each SCFCL moduleconsistsofaBSCCO2212bulkcoilwithacritical currentofabout520Aat77K.Seriesandparallel connection were tested. In series connection, prospectivecurrent as high as 67 kArms was limited to about 11 kApeak in the first peak. In parallel connection, prospective current as high as 65 kArms was limited to about 20 kApeak in the first peak. Low fault current tests were also carried out (current peaksof about3Ic)and in this case the SCFCL module takes more time to actuate, being considered satisfactory for “inrush” currents. Computational simulations were done considering the bulk coil E-J curve and heat transfers between SCFCL components and the LN2 bath. The simulations can reasonably predict the performance of the SCFCL assembly and provide additional information such as the temperature rise of superconductor and shunt