A reciprocating type active magnetic regenerative refrigeration (AMR) utilizes the magnetocaloric effect of magnetic materials which occurs during magnetization and demagnetization processes by moving magnetic materials in and out of a magnet. Estimating the induced voltage and electromagnetic force in the superconducting magnet during the reciprocation is crucial to optimize the design of the AMR system. This paper represents the behavior of the superconducting magnet during the AMR operation that the magnetic material HoAl 2 weighing 250 g enters and exits the 120 mm bore NbTi superconducting coil. The calculation and measurement results of the induced voltage and electromagnetic force in the magnetic field of 0–5 T at 25 K were reported.
9 December 2024 in IEEE Transactions on Applied Superconductivity
Active magnetic regenerative (AMR) refrigeration is expected to be used for hydrogen liquefaction owing to its wide operating temperature range. In a previous study, a reciprocating type of AMR refrigerator (Prototype 1) was used to demonstrate hydrogen liquefaction. In this study, a scaled-up version (Prototype 2) was developed to increase the amount of liquefied hydrogen. For Prototype 2, the main coils were split into two parts to extend the range of the 5 T magnetic field applied to the larger AMR beds filled with magnetic particles. As in Prototype 1, the arrangement of the AMR beds in series helped reduce the axial magnetic forces that hinder the reciprocating motion of the AMR beds and induced voltages in the superconducting magnet. To reduce AC losses, the filament radius of the NbTi superconducting wire used (in Prototype 2) was 10 µm, in contrast to the 30 µm wire used in Prototype 1. By improving the electrical design, the scaled-up magnetic refrigeration system can operate without any electromagnetic problems, such as magnetic forces, induced voltages, and AC losses.