Adilzhan Dyussambayev

Adilzhan Dyussambayev

Auto-generated profile, based on publicly available information

Adilzhan Dyussambayev

School of Nuclear Science and Engineering, Tomsk Polytechnic University, 30 Lenina av., 634050 Tomsk, Russia

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
Egor KashkarovEgor Kashkarov
Egor Kashkarov
Maksim KrinitcynMaksim Krinitcyn
Maksim Krinitcyn
ADAdilzhan Dyussambayev
Adilzhan Dyussambayev
AАAlexey Алексей
Alexey Алексей
MKMaxim Koptsev
Maxim Koptsev
In the present work, porous composites were fabricated from pure Al2O3 and mixed Ti3AlC2/Al2O3 powder by slip casting and sintering. The effect of sintering temperature and different composition ratio on microstructure, phase composition, porosity and gas permeation flux of the fabricated materials was investigated. The microstructure and phase composition of the samples were analyzed by scanning electron microscopy and X-ray diffraction, respectively. The gas permeation experiments were performed using pure hydrogen at 0.1–0.9 MPa pressure. It is shown that a decrease in sintering temperature from 1500 to 1350 °C results in an increase in hydrogen permeation flux of the alumina from 5 to 25 mol/(m2 × s), which is due to higher pore size and overall porosity of the samples. Sintering of Ti3AlC2/Al2O3 powder mixtures leads to the formation of Al2O3, Al2TiO5 and TiO2 phases as a result of oxidation of the Ti3AlC2 phase, resulting in an increased pore size in the composites compared with pure alumina. The open porosity of composites increases from 3.4 to 40% with an increasing Ti3AlC2/Al2O3 ratio from 1/10 to 1/2, respectively. The composites with the highest porosity (40%) had a maximum permeation flux of 200 mol/(m2 × s). The changes in the bending strength of the alumina and composite samples, depending on the microstructure and porosity, were also discussed. The investigated composites are considered promising materials for hydrogen separation membrane supports.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
ADA. K. Dyussambayev
A. K. Dyussambayev
MKM. G. Krinitsyn
M. G. Krinitsyn
DKDmitriy Georgievich Krotkevich
Dmitriy Georgievich Krotkevich
MKMaxim Koptsev
Maxim Koptsev
Egor KashkarovEgor Kashkarov
Egor Kashkarov
In the present work, Al2O3/Ti3AlC2 composites with different composition ratios was fabricated. The composites were sintered at 1550°C from blanks produced by slip casting. The microstructure and phase composition of the samples were analysed by scanning electron microscopy and X-ray diffraction, respectively. Gas permeability tests were investigated using a gas reaction automated machine. It is shown that the porosity of composites increases with increasing Ti3AlC2 content in the raw material. The composite Ti3AlC2/Al2O3 (1/2) with the highest porosity (40 %) had a maximum hydrogen flow of 200 mol/(m2s).