Saad Pervaiz

Saad Pervaiz

Auto-generated profile, based on publicly available information

Saad Pervaiz

Texas Instruments, Dallas, TX, USA

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DSDanish Shahzad
Danish Shahzad
SPSaad Pervaiz
Saad Pervaiz
NZNauman Ahmad Zaffar
Nauman Ahmad Zaffar
KAKhurram K. Afridi
Khurram K. Afridi
This article introduces a new transformerless ac-dc-ac converter topology suitable for a high-power-density high-frequency single-phase online uninterruptible power supply (UPS) with a common neutral between the input and output ac ports. The proposed converter comprises an input power factor correction rectification (ac-dc) stage which is followed by an inversion (dc-ac) stage. The rectification stage operates in boost mode during the input positive half line cycle and buck-boost mode during the input negative half line cycle, while the inversion stage operates in buck and buck-boost modes in the output positive and negative half line cycles, respectively. The rectification stage utilizes boundary conduction mode control enabling soft-switching and allowing high-frequency operation. The inversion stage is operated in continuous conduction mode, wherein a digital controller regulates the output voltage of the converter across both resistive and reactive loads. The proposed online UPS utilizes a single (nonsplit) dc-bus between the rectification and inversion stages, resulting in a 50% reduction in dc-bus capacitance requirement compared to conventional split-bus online UPS topologies. Additionally, two battery interface solutions are also investigated which provide a trade-off between passive volume and additional switch-count. To verify the performance and control of the proposed online UPS, a GaN-based electrolytic-free 1-kVA prototype online UPS is designed, built, and tested. The prototype ac-dc-ac converter achieves a peak efficiency of 95.2% and maintains a high efficiency of above 92.3% across the full output power range. The electrolytic-free prototype ac-dc-ac converter for the online UPS achieves a power density of 26.4 W/in 3 .

11 March 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MKMausamjeet Khatua
Mausamjeet Khatua
AKAshish Kumar
Ashish Kumar
SPSaad Pervaiz
Saad Pervaiz
SCSombuddha Chakraborty
Sombuddha Chakraborty
KAKhurram K. Afridi
Khurram K. Afridi
This article introduces a new single-stage universal-input isolated ac-dc converter based on the impedance control network (ICN) architecture. This resonant converter performs both power factor correction and output voltage regulation while operating at a constant switching frequency and duty ratio, by modulating the phase-shift between its two half-bridge inverters and the phase-shift between the two legs of its full-bridge rectifier. This phase-shift control strategy along with the ICN architecture also enables the converter to achieve high efficiency by ensuring zero-voltage-switching and near-zero-current-switching of all its inverter transistors throughout the line cycle and across wide ranges of input line voltage and output power. Power density is enhanced by realizing the three ICN inductors using a single magnetic structure with two coupled windings. This coupled inductor and a transformer constitute the two magnetic components of the proposed converter. A systematic methodology to design this ICN ac-dc converter is also introduced. A universal-input (90-265 V rms ), 20-V output, 330-W, 400-kHz ICN ac-dc converter prototype is built and tested. This prototype achieves a power density of 37.9 W/in 3 and peak efficiencies of 91.7%, 92.2%, 93.2%, and 93.4% at 90, 120, 230, and 265 V rms input, respectively.

16 February 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
DSDanish Shahzad
Danish Shahzad
MFMaida Farooq
Maida Farooq
SPSaad Pervaiz
Saad Pervaiz
KAKhurram K. Afridi
Khurram K. Afridi
This article presents a high-power-density high-efficiency soft-switched single-phase universal input to 28-V isolated ac–dc converter module designed for parallel operation. The proposed two-stage converter utilizes a totem-pole bridgeless boost power factor correction (PFC) ac–dc converter stage followed by an isolated LLC resonant dc–dc converter stage. A comprehensive design and optimization methodology is presented that compares various designs and operating modes for the converter's power stages and selects the optimal design based on overall power density and efficiency. Additionally, a control scheme is presented for the PFC stage to minimize current distortion by accounting for various sensor, control, and gate-drive delays while ensuring zero-voltage switching (ZVS) of the transistors. Moreover, a new droop control strategy is presented, which utilizes the input current of the LLC dc–dc stage to ensure equal output current distribution between paralleled modules powering a common output load. To validate the proposed design and control strategy, two 1-kW universal input to 28-V isolated ac–dc converter modules are built and tested. Each prototype converter module achieves a high power density of 84 W/in 3 and a peak efficiency of greater than 93% while ensuring a current distribution error of less than 0.3% when operating in parallel to deliver the maximum output power of 2kW.

23 March 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SPSaad Pervaiz
Saad Pervaiz
AKAshish Kumar
Ashish Kumar
KAKhurram K. Afridi
Khurram K. Afridi
This paper presents a single-phase, two-stage electrolytic-free offline LED driver that utilizes a hybrid film-ceramic stacked switched capacitor (SSC) energy buffer in place of limited-life electrolytic capacitors for twice-line-frequency energy buffering. The proposed LED driver comprises a front-end power factor correction (PFC) stage, followed by an isolated dc-dc conversion stage, with an SSC energy buffer connected across the intermediate dc bus. For the design of SSC energy buffer, an improved capacitance ratio optimization methodology is presented that incorporates the energy densities of commercially available capacitors and minimizes the passive volume of the buffer. Compared to a single capacitor, the optimized SSC energy buffer, comprising three switches, reduces the passive volume of the energy buffer by greater than 40%. A simple and robust control scheme is also proposed to interface the SSC energy buffer with the PFC converter. A prototype 300-W LED driver based on the proposed architecture, designed for universal input voltage range (90-305 V rms ) and 12-V output voltage is built and tested. The SSC energy buffer achieves a peak efficiency of 98.5% and maintains an efficiency of above 96% across a wide output power range, thus minimally impacting the overall system efficiency. Finally, the impact of the intermediate dc-bus voltage ripple on overall LED driver efficiency is investigated. It is found that there is negligible change in the efficiency when the intermediate dc-bus voltage ripple ratio is varied between 3% and 7.5%.

21 March 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SPSaad Pervaiz
Saad Pervaiz
AKAshish Kumar
Ashish Kumar
KAKhurram K. Afridi
Khurram K. Afridi
This paper presents a high-power-density high-power-factor GaN-based two-stage electrolytic-free offline LED driver. The LED driver achieves high power density through the use of a hybrid film-ceramic stacked switched capacitor (SSC) energy buffer, and a comprehensive optimization methodology that evaluates various converter topologies and designs and minimizes overall system volume while maintaining high efficiency. Based on this optimization approach, a totem-pole bridgeless boost power factor correction (PFC) converter is selected for the first stage, while a stacked-input isolated LLC dc-dc converter is selected for the second stage. The optimization procedure also minimizes the passive volume of the SSC energy buffer incorporating the volumetric energy density of commercially available capacitors. The optimized SSC energy buffer utilized in the proposed LED driver has 50% less passive volume than a capacitor-only solution. A 600-W prototype LED driver designed using the proposed approach for universal input voltage (90 - 305 V rms ) and 24-V output voltage is built and tested. The PFC stage achieves a peak efficiency of 98% while the LLC stage achieves a peak efficiency of 95%. The prototyped LED driver achieves a power density of 28 W/in 3 .

1 September 2016
Verified
Conference Paper
Closed access
AKAshish Kumar
Ashish Kumar
JLJie Lu
Jie Lu
SPSaad Pervaiz
Saad Pervaiz
ASAlihossein Sepahvand
Alihossein Sepahvand
KAKhurram K. Afridi
Khurram K. Afridi
This paper introduces a high-power-density high-efficiency isolated dc-dc converter based on the impedance control network (ICN) resonant converter architecture. The ICN converter maintains very high efficiency by achieving zero voltage switching (ZVS) and near zero current switching (ZCS) across a wide range of input voltages, output voltages and output power. High power density is achieved by combining the three inductors of the ICN converter into a single integrated magnetic structure with two coupled windings. Power losses in this integrated magnetic structure are minimized using a finite element analysis (FEA) based design optimization approach. A prototype 550-W, 1-MHz ICN converter incorporating the integrated magnetic structure, designed to operate over an input voltage range of 36 V to 60 V and an output voltage range of 34 V to 55 V is built and tested. The prototyped ICN converter achieves a power density of 462 W/in3, a peak efficiency of 96.7% and maintains efficiencies above 94.8% across its entire operating range.