6 May 2023 in Optics & Laser Technology
20 July 2018 in Journal of Applied Physics
Graphene is a useful saturable absorber in a variety of lasers working in mode-locking or Q-switch regimes. The optical performance of chemically synthesized graphene is still not completely characterized. In this study, the saturable absorption and the nonlinear refractive index of graphene flakes in N-methylpyrrolidone, in both liquid and solid phases, have been studied at 800 nm with the z-scan technique using femtosecond laser pulses. The results obtained using a Ti:sapphire laser oscillator in the mode-locking regime (6 fs, 78 MHz) or in the continuous wave shows that the optical properties of graphene have a thermal origin, while at the lower repetition rate and higher energy and intensity of a Ti:sapphire amplifier (95 fs, 1 kHz), it shows the electronic Kerr effect. Solid samples with very high optical densities, equivalent to 60 layers of graphene grown by chemical vapor deposition (CVD), can be fabricated. They show a higher saturation intensity ( GW cm–2) than CVD-grown (74 MW cm–2) or epitaxially grown (4 GW cm–2) graphene and intensity-dependent changes in transmission from 25% to 43%. This change in transmission in multilayer solid samples points to a good performance as a saturable absorber in laser cavities.
15 March 1986 in Physical Review B
Experiments on laser-induced thermomagnetic potentials were performed with pure Bi films. Measurements were carried out with different film thicknesses (3500, 2500, 2000, and 1500 Å) at room temperature. For films with a thickness of 3500 and 1500 Å, measurements were also made at temperatures ranging from 262 to 214 K and from 322 to 342 K, respectively. A change in the sign of these potentials is observed as the thickness diminishes or as the samples are cooled.
15 October 1989 in Physical Review B
An experiment on the laser-induced Nernst-Ettingshausen (NE) effect was performed at room temperature with pure bismuth films having a thickness of 5.5 μm. The observed behavior of the NE coefficient with the magnetic field was anomalous. A theoretical discussion of the results is carried out thereafter.
1 March 1992 in Superconductor Science and Technology
The microstructure of YBa2Cu3O7 thin films grown by pulsed laser deposition on (001)-oriented MgO substrates cut at different angles off-axis was studied by X-ray diffraction and transmission electron microscopy. The films consist of twin-related grain domains with the c axis normal to the surface. The in-plane texture was found to be epitaxially related to the substrate lattice as predicted by the near-coincidence site lattice theory. An increase in the number of grain orientations and their relative populations was observed when the angle at which the substrate was cut off-axis increased, corresponding to a deterioration of the electrical transport properties. Growth of preferred orientations was observed in a sample cut at a high off-axis angle. The bias toward a particular direction has been explained in terms of a constraint induced by surface steps in the grain nucleation.
15 March 1992 in Materials Science and Engineering: B