16 June 2021 in PFG – Journal of Photogrammetry, Remote Sensing and Geoinformation Science
1 May 2017 in Journal of Computing in Civil Engineering
The paper presents a novel computer vision-based traffic surveillance system capable of processing aerial imagery to track vehicles and their movements. The system uses a preprocessed 1-Hz image sequence with a coverage of 64.80 km2 (25 sq mi) from an aerial camera array mounted on an airplane. The unique characteristics of the input data make this work challenging. Heuristic and machine-learning approaches are combined and evaluated to detect and track vehicles for the purpose of collecting speed, density, and volume data for uninterrupted flow corridors, which are useful for big-data monitoring of traffic parameters over an entire 64.80 km2 (25 sq mi) area with a single sensor. The deep learning combined with speeded up robust features (SURF)-based approach is able to achieve over 94, 93, and 92% accuracies in speed, density, and volume estimates, respectively, on 50 s of data when compared with manually collected ground truth. It has 100% accuracy in measuring level of service (LOS) for the u...
1 April 2013 in Journal of Professional Issues in Engineering Education and Practice
The purpose of this study was to determine how a real-world, sustainability-focused engineering capstone course affected students’ critical thinking skills, student knowledge of sustainability, and student and faculty workloads. The research also investigated the effectiveness of a classwide jigsaw team approach. A combination of qualitative and quantitative assessment tools, including surveys, journals, interviews, and timecards, was employed to investigate the research questions. Results revealed that a real-world project with a focus on sustainability positively impacted students’ critical thinking skills and led to increased knowledge of sustainability, but it also correlated with a high workload for students and faculty. Additionally, the jigsaw organization structure proved successful and yielded a positive team-building experience for the students. These results suggest open-ended problems with real project constraints can yield a uniquely beneficial learning experience without sacrificing ...
21 July 2022 in Transportation Research Record: Journal of the Transportation Research Board
Adequate water pavement surface drainage on highways is crucial in minimizing the potential of hydroplaning. Highway cross slope has a significant effect of draining water laterally from the pavement surface. Currently, field surveying techniques and other manual measurement methods are used to collect cross slope data on a limited basis in most states, despite these methods being labor intensive and exposing personnel to traffic. Furthermore, field surveying techniques cannot provide continuous data and can only be conducted at sample-based locations. This study conducted a technical evaluation of the effectiveness of airborne LiDAR (light detection and ranging) scanning and mobile terrestrial LiDAR scanning systems in measuring pavement cross slopes. Cross slope data were extracted from the LiDAR point cloud at five selected test sections using two different methods: (i) end-to-end method using elevations only from the pavement edge lines to generate the cross slope; and (ii) 0.2 ft interval point extraction along the cross-section and using a fitted linear regression line as the basis for the cross slope. Cross slopes were also measured at test section locations using conventional surveying methods and compared with LiDAR-extracted cross slopes. Results demonstrate that LiDAR methods are reliable for collecting accurate pavement cross slopes and should be considered for the purpose of cross slope verification on a braod scale such as statewide to address cross slope and pavement surface drainage issues proactively.
19 October 2019 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Utility poles located along roads play a key role in road safety and planning as well as communications and electricity distribution. In this regard, new sensing technologies such as Mobile Terrestrial Laser Scanner (MTLS) could be an efficient method to detect utility poles and other planimetric objects along roads. However, due to the vast amount of data collected by MTLS in the form of a point cloud, automated techniques are required to extract objects from this data. This study proposes a novel method for automatic extraction of utility poles from the MTLS point clouds. The proposed algorithm is composed of three consecutive steps of pre-processing, cable area detection, and poles extraction. The point cloud is first pre-processed and then candidate areas for utility poles are specified based on Hough Transform (HT). Utility poles are extracted by applying horizontal and vertical density information to these areas. The performance of the method was evaluated on a sample point cloud and 98% accuracy was achieved in extracting utility poles using the proposed method.
1 December 2020 in Journal of Transportation Engineering, Part B: Pavements