17 December 2019 in Journal of Physics D: Applied Physics
This paper presents a high-frequency transmissive frequency selective rasorber (FSR) with wideband transmission/ absorption properties. It is synthesized by placing a resistive sheet on top of a bandpass frequency selective surface (FSS) separated by an air spacer. The unit cell of resistive sheet comprises the resistor-loaded central tortuous Jerusalem cross. Its central tortuous cross, acting as a parallel LC resonator with a high inductance and a low capacitance, is utilized to realize a wide pass-band with low insertion loss by cutting off resistive sheet’s lossy path over a wide frequency band. The bandpass FSS adopts a triple-layer coupled structure, in which two layers of identical capacitive metallic patches are coupled through an intermediate inductive wire grid. A second-order pass-band with high selectivity is realized by this bandpass FSS. Simulation results show that the fractional bandwidth of the 1 dB transmission band and the 10 dB absorption band is 19.6% and 107.9%, respectively. Meanwhile, since its periodicity is only 8 mm, the proposed FSR also shows good angular and polarization stabilities. A good agreement between the measured and simulated results validates the proposed FSR design.
19 July 2021 in Journal of Physics D: Applied Physics
A method for designing miniaturized frequency selective surface (FSS) using equivalent circuit model (ECM) and multi-objective particle swarm optimization (MOPSO) algorithm is proposed in this paper. In the proposed method, ECM describing the desired frequency response is established, and parameters of the ECM are determined using the MOPSO algorithm. Combining the ECM analysis and the MOPSO algorithm, the requirements of desired frequency response can be converted into the constraints of equivalent circuit parameters, which simplifies the optimization process of FSS design. For verification, a single-layer bandstop-bandpass FSS composed of convoluted elements with the unit cell size of 0.073 λ 0 × 0.073 λ 0 is designed. Simulation results show that the −15 dB bandwidth is from 2.62 to 2.83 GHz, and the −0.5 dB bandwidth is from 3.84 to 5 GHz. Meanwhile, the resonant frequency is stable at different incident angles (up to 80°) under TE and TM polarization. Finally, the proposed FSS prototype is fabricated and measured. The measured results agree well with the simulated ones.