1 September 2022 in Physics of Plasmas
Quasi-isentropic compression is required for inertial confinement fusion (ICF) to compress the target to a high density and high temperature status, where to match the laser pulse shape and target structure is of great significance to the implosion. However, many parameters for the laser pulse shape and the target structure should be optimized in order to realize such match. In this paper, the drive laser pulse and the target structure are designed using a random optimization method for a direct-drive ICF implosion driven by a 358.40 kJ laser pulse. This method can quickly optimize the laser pulse and target structure parameters for an efficient quasi-isentropic compression of the plasmas, leading to an areal density of 9.30% higher than that given by the hydrodynamic scaling. A correlation matrix is also constructed to analyze the correlation between the parameters. This provides a reference for further optimization and improvement. The method should have potential applications in the target design for future ICF experiments.
8 December 2023 in Plasma Physics and Controlled Fusion
Quasi-isentropic compression is an effective method to achieve high-density and high-temperature implosion in laser-driven inertial confinement fusion (ICF). However, it requires precise matching between the laser profile and the target structure. Designing the optimal laser profile and the corresponding target for ICF is a challenge due to the large number of parameters involved. In this paper, we present a novel method that combines random walk and Bayesian optimization. The basic sampling data for Bayesian optimization are a series of laser pulse profiles and target structures that can produce relatively high areal densities obtained by the random walk method. This approach reduces the number of samples required for Bayesian optimization and mitigates low efficiency in the latter stages of the random walk method. The method also reduces the randomness in the optimization process and enhances the optimization efficiency. It should have important applications in ICF research.
23 July 2024 in Plasma Physics and Controlled Fusion
High-Z dopants such as chlorine, bromine and silicon in carbon–hydrogen polymer (CH) targets play a crucial role during the ablation of inertial confinement fusion (ICF). These dopants can serve as diagnostic tools in experiments and mitigate hot electron preheating, but they also influence the laser ablation. In this paper, the process of high-power laser ablating doped CH targets has been studied through radiation hydrodynamic simulations. Our findings reveal that the laser absorption rate in the doped targets increase as a result of the increasing electron-ion collision frequency. This leads to the increase of the electron, ion and radiation temperatures. Furthermore, high-Z dopants contribute to a decrease in the ablation pressure, which tends to a constant. Moreover, the saturation phenomenon of the mass ablation rate has been found. For the targets with low doping ratios (e.g. 6.25%–12.5%), the mass ablation rate increases until reaching the saturation at a doping ratio of 18.75%, after which it decreases. This indicates that an appropriate doping ratio can increase the laser absorption and ablation. The results are helpful to comprehensively understand the effects of high-Z dopant on all stages of ICF.
23 May 2025 in Nuclear Fusion
The control of Rayleigh–Taylor instability (RTI) in target implosion compression is a classical problem in laser-driven inertial confinement fusion (ICF). Modeling the evolution of RTI by using high-dimensional radiation hydrodynamics simulations requires significant computational resources. In this paper, we present a novel approach to evaluate and predict the growth of RTI in direct-driven ICF. The target implosion velocities and accelerations at critical moments are derived according to the laser profiles and the target structures by the hydro-equivalent analysis and spherical ablation theory, combined with the adiabat from the one-dimensional simulation. Then, combining with the nonlinear RTI theory, the RT spikes penetration ratio is used to evaluate the integrity of the target. The most stable laser profile and target structure design can be quickly selected and the development of RTI is verified in the two-dimensional radiation hydrodynamics simulation. The results show that the areal density is increased by 68.2% by applying the most stable laser profile and target structure design compared with that of the initial case. These findings have significant implications for enhancing direct-drive ICF instability control.
7 October 2025 in Matter and Radiation at Extremes
In the direct drive inertial confinement fusion (ICF) scheme, a rippled interface between the ablator and the deuterium–tritium ice fuel can feed out and form perturbation seeds for the ablative Rayleigh–Taylor instability, with undesirable effects. However, the evolution of this instability remains insufficiently studied, and the effects of high-Z dopant on this instability remain unclear. In this paper, we develop a theoretical model to calculate the feedout seeds and describe this instability. Our theory suggests that the feedout seeds are determined by the ablation pressure and the adiabatic index, while the subsequent growth depends mainly on the ablation velocity. Two-dimensional radiation hydrodynamic simulations confirm our theory. It is shown that targets with high-Z dopant in the outer ablator exhibit more severe feedout seeds, because of their higher ionization compared with undoped targets. The X-ray pre-ablation in high-Z doped targets significantly suppresses subsequent growth, leading to suppression of short-wavelength perturbations. However, for long-wavelength perturbations, this suppression is weakened, resulting in increased instability in high-Z doped targets. The results are helpful for understanding the inner-interface-initiated instability and the influence of high-Z dopant on it, providing valuable insights for target design and instability control in ICF.
1 April 2025 in Physics of Plasmas
We present a novel method for optimizing surface modulation structures of solid targets to enhance ion beam yield via the target normal sheath acceleration mechanism. For the initially set conical target, we used a random walk sampling algorithm to optimize the microstructure on the conical surface. With only 36 simulations, we achieved the optimized structure, significantly improving the temperature and yield of hot electrons, and forming a more robust longitudinal sheath electric field. Two-dimensional particle-in-cell simulations demonstrated that the optimized irregular modulation structure achieved an ion beam yield of 34% higher than that of the initial cone structure, and a fivefold enhancement compared to planar targets. This study validates the effectiveness of random walk sampling in multi-parameter optimization for laser-driven ion acceleration, offering an effective approach for designing high-performance targets in experimental applications.