This research reports a comprehensive characterization of the composition profile and physical and chemical characteristics of roasted Arabica coffee oil obtained by mechanical pressing. The oil presented a peroxide value of 3.21 meq·kg-1 and an acid value of 7.3 mg KOH·g-1. A higher proportion of unsaturated fatty acids (58%), predominantly linoleic (L) and palmitic (P) acids, was observed; PLL and PLP were estimated as the main triacylglycerols. The oil was characterized by high contents in diterpenes and tocopherols (3720 and 913 mg·100g-1, respectively), the presence of caffeine and chlorogenic acids, as well as a high sun protection factor (9.7) and ABTS free radical-scavenging capacity (12.5 mg Trolox·mL-1). Among the 35 volatile compounds studied, furfurythiol and pyrazines were the main components of the oil. These properties showed that roasted coffee oil has good potential for use in food and cosmetics.
Around 20% of Brazilian coffee production corresponds to defective beans (PVA), which decreases the quality of the coffee brews. Steam treatment has been reported as an alternative to improve the cup quality of coffee products. This research aimed to study the feasibility of using steamed Robusta PVA beans in instant coffee products. After the steam treatment (2 bar for 3 min), the Robusta PVA was dried, roasted, subjected to extraction in a pilot plant, and freeze-dried. The steamed and untreated Robusta PVA materials (raw, roasted, and instant coffees) and blends of instant Arabica coffee with PVA were characterized. The steamed Robusta PVA instant coffee presented 7.01 g caffeine and 8.74 g total chlorogenic acids in 100 g product. Instant coffee blends with 30% and 50% of steamed Robusta PVA in Arabica coffee were studied. A sensory difference between blends with steamed and untreated Robusta PVA was only perceived by the addition of 50% PVA. The blend with 50% of steamed coffee was preferred and well accepted (average grade of 7.9 on a 10-scale). The use of steamed Robusta PVA coffee (under mild steam treatment conditions, 2 bar/3 min) in instant coffee was viable, and it was obtained an instant coffee to be used in a blend with 50% of Arabica coffee with a good profile of bioactive compounds and sensory acceptance.
Brazil is the second largest coffee consumer in the world, however, the participation of the young public in this market is not very expressive. The objective of this study was to evaluate the impact of non-sensory (packaging color, information, and images) and brewing methods (hot or cold extraction) on the acceptance of cold coffee beverages by young consumers. A coffee:water ratio of 1:10 (w:v) and infusion during 4 min and 24 h was used for both hot and cold extractions, respectively. Hot extraction was performed at 95 °C, then cooled in a refrigerator and served at 6 to 10 °C, the same temperature that the cold extraction was performed and served. The beverages were characterized by composition and extraction yield. The packaging of the beverages was designed aiming to appeal to the young Brazilian public (15 to 24 years old), and it was used for the Expectation Evaluation. The type of extraction (hot or cold) produced beverages with differences in composition but with similar acceptance. Except for pH (average value of 5.1), the beverages differed in all the studied parameters. Hot-extracted beverages (iced coffees) had higher contents of caffeine, chlorogenic acids, and melanoidins (92.9, 258.2, and 360.8∙10-6 kg 100 mL-1, respectively); they also presented higher acidity (3.4 mL of NaOH 20 mL-1) as well as higher yield compared to the cold-extracted beverages (cold brews). The use on product labels of brown and black colors, coffee bean images, and the inclusion of information regarding the beverages (extraction method, consumption temperature, non-addition of sugar) generated a positive expectation that was assimilated by the young public. In conclusion, both proposals of cold coffee beverages (by hot or cold extraction) were well accepted considering their sensory and non-sensory aspects. Key words: Caffeine; CGA; Coffea arabica; melanoidins; packaging.