Hitting the limits on propene synthesis: The greater abundance of propane from shale gas has spurred efforts to use it as a propylene feedstock. Direct dehydrogenation catalysts consisting of platinum–tin alloy nanoparticles supported on alumina often must run with hydrogen dilution to avoid carbon buildup and excess tin to avoid alloy segregation. Motagamwala et al. report that platinum–tin nanoparticles interact more weakly with a silica support and the metals thus do not segregate. The use of undiluted reactants allowed the reaction to run near the thermodynamically limit of about 67% conversion with a selectivity to propylene of more than 99%. This catalyst also does not build up carbon and could run up to 30 hours without deactivation. Science , abg7894, this issue p. 217
We report a process for converting fructose, at a high concentration (15 weight %), to 2,5-furandicarboxylic acid (FDCA), a monomer used in the production of polyethylene furanoate, a renewable plastic. In our process, fructose is dehydrated to hydroxymethylfurfural (HMF) at high yields (70%) using a γ-valerolactone (GVL)/H2O solvent system. HMF is subsequently oxidized to FDCA over a Pt/C catalyst with 93% yield. The advantage of our system is the higher solubility of FDCA in GVL/H2O, which allows oxidation at high concentrations using a heterogeneous catalyst that eliminates the need for a homogeneous base. In addition, FDCA can be separated from the GVL/H2O solvent system by crystallization to obtain >99% pure FDCA. Our process eliminates the use of corrosive acids, because FDCA is an effective catalyst for fructose dehydration, leading to improved economic and environmental impact of the process. Our techno-economic model indicates that the overall process is economically competitive with current terephthalic acid processes.
Production of renewable chemicals to mitigate the deleterious effects of greenhouse gas emissions requires technologies that are cost-competitive with the fossil-fuel industry, require low capital investment, and produce high-value products. We report production of 5-hydroxymethylfurfural (HMF), a valuable platform molecule from biomass-derived carbohydrates at high yields (>90%) and with excellent carbon balance (>95%) using an inexpensive solvent system composed of acetone and water. We demonstrate that HMF, a thermally unstable molecule, can be separated from this low boiling solvent system with high recovery (96%) and purity (∼99%). We show that fructose is selectively dehydrated in this solvent system from a mixture of glucose and fructose, a property that can be leveraged to integrate the proposed process with current processes for the production of high fructose corn syrup. Techno-economic analysis indicates that utilizing fructose as feedstock leads to low investment (16 MM$) and produces HMF at a minimum selling price (MSP) of $1710 per ton. The MSP can be further reduced to $1460 per ton by changing the feedstock to glucose.
7 June 2018 in Annual Review of Chemical and Biomolecular Engineering
Microkinetic analysis plays an important role in catalyst design because it provides insight into the fundamental surface chemistry that controls catalyst performance. In this review, we summarize the development of microkinetic models and the inclusion of scaling relationships in these models. We discuss the importance of achieving stoichiometric and thermodynamic consistency in developing microkinetic models. We also outline how analysis of the maximum rates of elementary steps can be used to determine which transition states and adsorbed intermediates are kinetically significant, allowing the derivation of general reaction kinetics rate expressions in terms of changes in binding energies of the relevant transition states and intermediates. Through these analyses, we present how to predict optimal surface coverages and binding energies of adsorbed species, as well as the extent of potential rate improvement for a catalytic system. For systems in which the extent of potential rate improvement is small because of limitations imposed by scaling relations, different approaches, including the addition of promoters and formation of catalysts containing multiple functionalities, can be used to break the scaling relations and obtain further rate enhancement.