Hitting the limits on propene synthesis: The greater abundance of propane from shale gas has spurred efforts to use it as a propylene feedstock. Direct dehydrogenation catalysts consisting of platinum–tin alloy nanoparticles supported on alumina often must run with hydrogen dilution to avoid carbon buildup and excess tin to avoid alloy segregation. Motagamwala et al. report that platinum–tin nanoparticles interact more weakly with a silica support and the metals thus do not segregate. The use of undiluted reactants allowed the reaction to run near the thermodynamically limit of about 67% conversion with a selectivity to propylene of more than 99%. This catalyst also does not build up carbon and could run up to 30 hours without deactivation. Science , abg7894, this issue p. 217
Propylene production through propane dehydrogenation (PDH) is endothermic, and high temperatures required to achieve acceptable propane conversions lead to low selectivity and severe carbon-induced deactivation of conventional catalysts. We developed a catalyst-membrane system that removes the hydrogen by-product and can thus achieve propane conversions that exceed equilibrium limits. In this codesigned system, a silica/alumina (SiO 2 /Al 2 O 3 ) hollow-fiber hydrogen membrane was packed with a selective platinum-tin (Pt 1 Sn 1 /SiO 2 ) PDH catalyst on the tube side with hydrogen diffusing from the tube to the shell side. We demonstrate that the catalyst-membrane system can achieve propane conversions >140% of the nominal equilibrium conversion with a propylene selectivity >98% without deactivation of the system components. We also show that by introducing oxygen on the shell side of the catalyst-membrane system, we can couple the endothermic PDH reaction on the tube side with exothermic hydrogen oxidation on the shell side. This coupling results in higher rates of hydrogen transport, leading to further enhancements in the propane conversion as well as desired thermoneutral system operation.
Platinum catalysts degrade through dissolution and growth in electrocatalytic reactions. This work attempted to make a protection nanocoating of porous niobium oxide (NbOₓ) on Pt supported on carbon black (Pt/C), or Pt/C@NbOₓ, using the condensed layer deposition (CLD) technique. It was found that nanocoating thicknesses have a significant effect on the catalyst durability. The best catalyst was found to have a 29 wt.% NbOx loading, corresponding to ca. 1.5 nm nanocoating thickness on the Pt/C catalyst. It was further found that thermal annealing critically influenced the catalyst performances. The Pt/C@NbOₓ catalyst annealed at 400 °C retained amorphous NbOₓ, while that annealed at 600 °C formed crystalline structures of NbOx. Electronic interactions between Pt and the crystalline NbOₓ were evidenced by Pt 4f core electron binding energy shifting positively and Nb 3d core electron shifting negatively. Accelerated stress tests for up to 30,000 cycles showed 16.5% increase in the electrochemical surface area (ECSA) of Pt/C@NbOₓ annealed at 600 °C, in contrast to a 49.8% loss in ECSA of Pt/C. More significantly, the loss in half-wave potential in oxygen reduction reaction is close to zero. This remarkably enhanced catalyst durability is attributed to the protection effect from the porous NbOₓ nanocoatings.