28 March 2022 in IEEE Transactions on Antennas and Propagation
The atmospheric absorption effect greatly increases the transmission loss of terahertz (THz) waves, which limits the transmission distance. In this article, with the support of sufficient antenna gain, a series of high-frequency THz transmission windows in the ground-satellite link are presented. First, the more ideal ground-based site is determined. Based on the path loss model and the layered transmission theory, the total path loss is obtained. Combined with signal transmit power, antenna gain, signal-to-noise ratio, and noise power, total usable bandwidths and transmission windows in the 0.2–15 THz corresponding to antenna gain from 0 to 100 dBi are given. By taking the high-altitude platform as a relay link, the usable transmission windows are also given. The first six transmission windows are identified as [0.4776–0.48645 THz], [0.4906–0.49975 THz], [0.6618–0.6811 THz], [12.1015–12.10355 THz], [12.10425–12.11285 THz], and [12.11505–12.14355 THz] bands against 100 dBi gain near 1 and 10 THz bands, respectively. Furthermore, the influence of ice clouds on the transmission characteristics is analyzed. The additional attenuation in the partial usable atmospheric window frequency range can reach 1.84 dB typical, which is directly related to the effective radius and shape of particles.
1 November 2020 in IEEE Transactions on Plasma Science
1 February 2023 in AIP Advances
Single event upset effect is an important factor that causes performance degradation and functional failure of aerospace equipment components in space radiation environment. When high-energy particles incident on semiconductor devices in working state, they will induce functional errors of devices and even cause permanent damage. Based on the finite element method, the three-dimensional simulation of Metal-oxide-semiconductor field-effect transistor (MOSFET) is carried out. The single event upset effect of MOSFET under heavy ion irradiation and the influence of heavy ion irradiation on transient drain current are investigated. The results show that the transient drain current of MOSFET devices will increase rapidly when heavy ions are incident, and then the logic state of the devices will change. With the increase in linear energy transfer density, the peak value of the transient drain current pulse increases and the pulse width decreases. With the increase in the incident angle, the peak value of the pulse first increases and then decreases. The maximum value is obtained when the incident angle is vertical, the pulse width first decreases and then increases, and the minimum value is obtained when the incident angle is vertical. With the increase in MOSFET size, the difference of transient drain current formed by symmetrical heavy ion incidence is becoming smaller and smaller. When the incident track is completely in the drain region, the simulation results are the same.
11 July 2023 in IEEE Transactions on Plasma Science
The actual working environment of spacecraft in space is highly harsh, among which space radiation is the primary harmful environmental factor leading to spacecraft failure in orbit. This study investigates field emission, multipacting, and outgassing ionization as effects of electromagnetic radiation on the thermal control layer (TCL) of spacecraft. Based on the particle-in-cell (PIC) simulation method coupled with Monte Carlo collisions (MCCs), a 2-D simulation model of particle motion in a vacuum is created to study the evolution of the point discharge process of electromagnetic irradiation breakdown to generate plasma. Simulated and analyzed results show the impact of various microwave amplitudes, frequencies, and gas densities on the interface breakdown of thermal control materials. According to the findings, the number of primary electrons generated and the energy attained by them in the microwave field increase with the electric field, speeding up secondary electron emission, and gaseous collision ionization; the time it takes for the electrons to return to bombard the surface of the material under the influence of the microwave field is shortened with increasing microwave frequency, which promotes electron multipacting; the frequency of collisions and ionization increases with gas density, which facilitates the occurrence of avalanche ionization. After the avalanche, there is a large energy deposition of plasma on the surface of the thermally controlled material, which results in a quick rise in temperature and subsequent damage.
12 January 2021 in IEEE Transactions on Plasma Science
Research on the location and shape of a beam spot at a target altitude can lay the foundation for understanding and diagnosing the long-range propagation of relativistic electron beams. Only a few studies have focused on this approach. In this study, a terrestrial atmosphere with a 3-D geomagnetic field was constructed in accordance with the International Geomagnetic Reference Field model and a relevant atmosphere model. Monte Carlo simulations were applied to the long-range propagation of relativistic (1-10 MeV) electron beams in the altitude range of 200-300 km. The results showed that when beams with various parameters were emitted in one location, the centers of the beam spots were distributed in concentric circles with different radii. The direction of the geomagnetic field determined the locations of the circle centers, whereas the beam energy and pitch angle determined the radii. When the initial gyrophase changed, the center of the beam spot rotated through the same angle. The beam spot was distributed as a partial ring with a width mainly related to the initial beam radius when the energy spread was relatively small. If the energy spread exceeded the limit, the beam spot was ring-shaped; the ring width was determined by both the initial beam radius and the energy spread.
2 December 2021 in IEEE Transactions on Plasma Science
To study the electromagnetic radiation effect of a thermal control layer (TCL) on the surface of general spacecraft in a space environment, a model of a metal aluminum film material irradiated with microwaves was established, particle-in-cell (PIC)-Monte Carlo collisions (MCCs) simulation was used, and the processes of field emission, multipacting, outgassing, and impact ionization on the surface of thermal control materials were simulated. By comparing the primary-, secondary-, and impact ionization electrons produced under different gas densities, the influence of the process on metal aluminum film was analyzed. The simulation results show that the field emission, multipacting, and collisional ionization on the material surface all strengthened when the outgassing density exceeded the threshold value, and outgassing collision ionization was dominant among them. Avalanche ionization occurred on the material surface to generate plasma, which absorbs electromagnetic wave energy, and the total increase in the energy of ions and electrons may cause damage to the aluminum film, which is very important in its practical application.