Nowadays, the simplicity of both designing and fabrication process of a terahertz (THz) resonator-based sensing technique leads to its ongoing development. The consumable THz resonator needs to be easily integrated into an existing terahertz time domain spectroscopy (THz TDS) measurement system. It should also be able to be fabricated in a mass scale with a low production cost. In this work, a metal-coated surface plasmon resonance- (SPR-) based sensor is simulated and designed as a low-cost refractive index sensor utilizing rigorous coupled wave analysis (RCWA). To demonstrate our methodology, we design a gold-coated grating with a polydimethylsiloxane (PDMS) as a substrate, in order to perform quantitative analysis of gasoline-toluene mixture composition, which has a refraction index variation of 0.1 at THz frequency. The grating period is tuned such that its surface plasmon resonance (SPR) frequency matches with the peak frequency of the THz TDS system. Moreover, other grating parameters, i.e., a filling factor and a grating depth, are optimized to increase the sensor sensitivity and sharpen the resonance dip. High sensitivity up to 500 GHz/RIU with a refractive index resolution up to 0.01 is numerically revealed. The H-field of the designed grating is then evaluated to indicate a strong SPR excitation. The well-developed designed grating introduces a promising, low-cost, and easily fabricated THz refractive index sensor.
Designs of hollow-core rectangular, circular, and elliptical waveguides with inner coating of silver and polystyrene (PS) are presented for low-loss terahertz guidance. The PS thickness deposited over silver is optimized to achieve the lowest possible loss for each waveguide at the frequency of 2.5 THz. The mode also tends to be a near-Gaussian in shape, easy for coupling to transmitter and receiver. The lowest propagation loss of 0.13 dB/m is obtained for the mode in a circular waveguide with 2200 μm bore diameter by using a full-vectorial finite element method. It is also shown here that rectangular and elliptical waveguides with a similar core area offer a lower loss value for the H 21y mode and the LP 02 mode, respectively, compared to a circular waveguide. Besides this optimized rectangular waveguide not only shows a minimum loss of 0.09 dB/m but with 4 times higher loss for the other polarization, hence the polarization state of the signal can also be maintained in this waveguide.
One of the most important technological challenges that photoconductive devices in terahertz systems encounter is the viability of cost-effective and large-scale device production. We introduce an economical and mass-producible approach to fabricating a substrate material for photoconductive devices. By using an electron beam irradiator, the material properties of GaAs were engineered in a controllable manner, achieving comparable performance to that of a well-known photoconductive substrate, LT-GaAs. THz emission of the irradiated substrates was tested and found to be superior to a commercial device in terms of high-power THz signal emission and ability to withstand a high bias voltage.
A diffractive grating is a well-known optical component and is extensively used in many applications. This research work explores application of the diffractive grating in a photoconductive antenna (PCA) of a terahertz time domain spectroscopy (THz-TDS) system, by utilizing benefits of a sub-wavelength grating structure. The grating PCA structure was modeled and simulated by COMSOL Multiphysics software (COMSOL, Inc., Burlington, MA, USA). Performance of the proposed PCA design is studied in terms of its induced photocurrent. The effects of geometrical parameters of the grating are also investigated and analyzed through its optical and electrical responses. Thanks to the increase in absorption of the incident laser’s electric field, the simulation results show a 63% increment of the induced photocurrent in the grating PCA, compared with the conventional planar PCA.