Nowadays, the simplicity of both designing and fabrication process of a terahertz (THz) resonator-based sensing technique leads to its ongoing development. The consumable THz resonator needs to be easily integrated into an existing terahertz time domain spectroscopy (THz TDS) measurement system. It should also be able to be fabricated in a mass scale with a low production cost. In this work, a metal-coated surface plasmon resonance- (SPR-) based sensor is simulated and designed as a low-cost refractive index sensor utilizing rigorous coupled wave analysis (RCWA). To demonstrate our methodology, we design a gold-coated grating with a polydimethylsiloxane (PDMS) as a substrate, in order to perform quantitative analysis of gasoline-toluene mixture composition, which has a refraction index variation of 0.1 at THz frequency. The grating period is tuned such that its surface plasmon resonance (SPR) frequency matches with the peak frequency of the THz TDS system. Moreover, other grating parameters, i.e., a filling factor and a grating depth, are optimized to increase the sensor sensitivity and sharpen the resonance dip. High sensitivity up to 500 GHz/RIU with a refractive index resolution up to 0.01 is numerically revealed. The H-field of the designed grating is then evaluated to indicate a strong SPR excitation. The well-developed designed grating introduces a promising, low-cost, and easily fabricated THz refractive index sensor.
One of the most important technological challenges that photoconductive devices in terahertz systems encounter is the viability of cost-effective and large-scale device production. We introduce an economical and mass-producible approach to fabricating a substrate material for photoconductive devices. By using an electron beam irradiator, the material properties of GaAs were engineered in a controllable manner, achieving comparable performance to that of a well-known photoconductive substrate, LT-GaAs. THz emission of the irradiated substrates was tested and found to be superior to a commercial device in terms of high-power THz signal emission and ability to withstand a high bias voltage.
An ADAM optimization method, implemented using the Theano framework, for water-vapor effect removal from THz-TDS (terahertz time-domain spectroscopy) data is proposed. The cost function is derived from the ratio between the energy in the main THz pulse and the oscillation after the pulse as in [1]. A quantitative experimental validation of the method is performed. For free space measurement, the cost function is 0.018 in a sealed N2 environment, 0.043 in an open environment and 0.020 for the open environment data after applying the method. In addition, a qualitative improvement of D-(-)-Quinic acid's THz absorbance measurement in an open environment, where atmospheric humidity exists, is demonstrated. The cross-correlation between the D-(-)-Quinic acid's absorbance spectrum measured in a sealed N2 environment and one measured in an open environment increases from 0.044 to 0.62 after the water-vapor effect removal method is applied.