We obtain temperature-dependent recombination coefficients by measuring the quantum efficiency and differential carrier lifetimes in the state-of-the-art InGaN light-emitting diodes. This allows us to gain insight into the physical processes limiting the quantum efficiency of such devices. In the green spectral range, the efficiency deteriorates, which we assign to a combination of diminishing electron-hole wave function overlap and enhanced Auger processes, while a significant reduction in material quality with increased In content can be precluded. Here, we analyze and quantify the entire balance of all loss mechanisms and highlight the particular role of hole localization.
We show that the often observed efficiency droop in AlGaN quantum well heterostructures is an internal carrier loss process, analogous to the InGaN system. We attribute this loss process to Auger recombination, with C = 2.3 × 10−30 cm6 s−1; a similar value found commonly in InGaN-based devices. As a result, the peak internal quantum efficiency (IQE) of our structures is limited to 66%. These values were obtained by resonant excitation (time-resolved) photoluminescence (PL), avoiding common error sources in IQE measurements. The existence of strong Auger recombination implies that simple methods employed for IQE determination, such as temperature-dependent PL, may lead to erroneous values. Auger losses will have to be considered once the challenges regarding carrier injection are solved.
27 October 2015 in Physica Status Solidi (RRL) – Rapid Research Letters
Ga2O3 and its polymorphs are attracting increasing attention. The rich structural space of polymorphic oxide systems such as Ga2O3 offers potential for electronic structure engineering, which is of particular interest for a range of applications, such as power electronics. γ‐Ga2O3 presents a particular challenge across synthesis, characterization, and theory due to its inherent disorder and resulting complex structure–electronic‐structure relationship. Here, density functional theory is used in combination with a machine‐learning approach to screen nearly one million potential structures, thereby developing a robust atomistic model of the γ‐phase. Theoretical results are compared with surface and bulk sensitive soft and hard X‐ray photoelectron spectroscopy, X‐ray absorption spectroscopy, spectroscopic ellipsometry, and photoluminescence excitation spectroscopy experiments representative of the occupied and unoccupied states of γ‐Ga2O3. The first onset of strong absorption at room temperature is found at 5.1 eV from spectroscopic ellipsometry, which agrees well with the excitation maximum at 5.17 eV obtained by photoluminescence excitation spectroscopy, where the latter shifts to 5.33 eV at 5 K. This work presents a leap forward in the treatment of complex, disordered oxides and is a crucial step toward exploring how their electronic structure can be understood in terms of local coordination and overall structure.
26 February 2016 in Japanese Journal of Applied Physics
We suggest a novel technique for the evaluation of the recombination coefficients corresponding to Shockley–Read–Hall, radiative, and Auger recombination that occur in InGaN/GaN-based light-emitting diodes (LEDs). This technique combines the measurement of the LED efficiency as a function of LED drive current with a small-signal time-resolved photoluminescence measurement of the differential carrier life time (DLT). Using the relationships between the efficiency and DLT following from the empirical ABC-model, one can evaluate all three recombination coefficients. The suggested technique is applied to a number of single- and multiple-quantum well LEDs to gain a deeper insight into the mechanisms ultimately limiting their efficiency.
We report on a systematic study of the determination of the internal quantum efficiency (IQE) in AlGaN-based multiple-quantum-well (MQW) structures using different optical evaluation methodologies and experimental conditions, in order to derive a standard set of measurement conditions for reliable IQE determination. Several potential sources of error that may distort the IQE obtained by optical measurements are discussed, such as carrier transport effects, excitation conditions failing to fulfill ideal resonance conditions, and morphology issues. A series of nominally identical AlGaN-based MQW structures is grown on an AlGaN layer separated by an AlN interlayer of varying thickness. The MQW structures are studied both by resonant and quasiresonant photoluminescence spectroscopy, and IQEs are determined via different commonly employed methods. The obtained values are shown to be significantly affected by the employed excitation conditions, as well as the evaluation techniques. In addition, growth morphology issues and carrier transport effects need to be considered in the interpretation of the measured data, with the latter being investigated in greater detail. The results emphasize the need for an appropriate choice of both experimental conditions and evaluation methodology in order to extract reliable and comparable IQE values.