17 August 2022 in Advanced Materials
Ga2O3 and its polymorphs are attracting increasing attention. The rich structural space of polymorphic oxide systems such as Ga2O3 offers potential for electronic structure engineering, which is of particular interest for a range of applications, such as power electronics. γ‐Ga2O3 presents a particular challenge across synthesis, characterization, and theory due to its inherent disorder and resulting complex structure–electronic‐structure relationship. Here, density functional theory is used in combination with a machine‐learning approach to screen nearly one million potential structures, thereby developing a robust atomistic model of the γ‐phase. Theoretical results are compared with surface and bulk sensitive soft and hard X‐ray photoelectron spectroscopy, X‐ray absorption spectroscopy, spectroscopic ellipsometry, and photoluminescence excitation spectroscopy experiments representative of the occupied and unoccupied states of γ‐Ga2O3. The first onset of strong absorption at room temperature is found at 5.1 eV from spectroscopic ellipsometry, which agrees well with the excitation maximum at 5.17 eV obtained by photoluminescence excitation spectroscopy, where the latter shifts to 5.33 eV at 5 K. This work presents a leap forward in the treatment of complex, disordered oxides and is a crucial step toward exploring how their electronic structure can be understood in terms of local coordination and overall structure.
17 April 2023 in Applied Physics Letters
In this study, we dry etched SiO2-masked (001) β-Ga2O3 substrates in HCl gas flow at a high temperature without plasma excitation. The etching was done selectively in window areas to form holes or trenches with inner sidewalls of (100) and/or {310} facets, which are the smallest surface-energy-density plane and oxygen-close-packed slip planes, respectively. In particular, (100) faceted sidewalls were flat and relatively close to the substrate surface normal. Therefore, this simple dry etching method is promising for fabricating plasma-damage-free trenches and fins used for β-Ga2O3-based power devices.
14 June 2022 in Applied Physics Express
We demonstrated selective area growth of β-Ga2O3 by HCl-based halide vapor phase epitaxy on SiO2-masked (001) and (010) β-Ga2O3 substrates. Perfect growth selectivity was achieved under the presence of HCl etching gas in addition to the growth precursors. In both substrate cases, (100) facet dominated the grown shapes owing to their smallest surface energy density. High-aspect-ratio structures having (100) sidewall facets were observed for the stripe windows along [010] and [001] directions on the (001) and (010) substrates, respectively. These structures may be applicable to trenches and fins used for β-Ga2O3-based power devices.
1 January 2024 in Applied Physics Express
We report the characterization and application of mist-CVD-grown rutile-structured Ge
x
Sn1−x
O2 (x = ∼0.53) films lattice-matched to isostructural TiO2(001) substrates. The grown surface was flat throughout the growth owing to the lattice-matching epitaxy. Additionally, the film was single-crystalline without misoriented domains and TEM-detectable threading dislocations due to the coherent heterointerface. Using the Ge0.49Sn0.51O2 film with a carrier density of 7.8 × 1018 cm−3 and a mobility of 24 cm2V−1s−1, lateral Schottky barrier diodes were fabricated with Pt anodes and Ti/Au cathodes. The diodes exhibited rectifying properties with a rectification ratio of 8.2 × 104 at ±5 V, showing the potential of Ge
x
Sn1-x
O2 as a practical semiconductor.
26 November 2025 in Science and Technology of Advanced Materials
We demonstrated rapid homoepitaxial growth on (011) β-Ga2O3 substrates using HCl-based halide vapor phase epitaxy (HVPE), in which GaCl was synthesized by reacting metallic Ga with HCl gas, and examined properties of the resulting layer. These were compared with layers grown using Cl2-based HVPE, where GaCl was produced from Ga and Cl2. The growth rate on (011) substrates, approximately 60% of that on (001), reached ~14 μm/h, which was 5–7 times higher than those previously reported for Cl2-based HVPE. Despite this high rate, no polycrystalline grains, sometimes found in Cl2-based HVPE, were detected. Atomic force microscopy revealed a surface with root-mean-square roughness of 6.5 nm over a 100 × 100 μm2 area. In contrast, Nomarski microscopy revealed the presence of pits (~10 μm in diameter at 3.6 μm thickness) with a density of ~3.7 × 103 cm−2, a feature not reported for Cl2-based HVPE. Cross-sectional transmission electron microscopy confirmed the absence of crystal defects or inclusions at the pit bottom. X-ray diffraction 2θ–ω scans and pole figure measurements confirmed that the epitaxial layers were single crystalline, with rocking-curve FWHM values comparable to or smaller than those of the substrate. Secondary ion mass spectrometry revealed a chlorine concentration of 1.7 × 1015 cm−3, which was significantly lower than 1.1 × 1016 cm−3 measured in the (001) layers. Thus, while the pit issue requires further investigation, HCl-based HVPE enables the rapid growth of low-chlorine (011) β-Ga2O3, offering significant potential for cost reduction in high-performance power devices with thick drift layers.
1 August 2023 in Japanese Journal of Applied Physics
We investigated the anisotropic selective-area HCl-gas etching behavior of SiO2-masked (001) β-Ga2O3 and its dependence on the temperature T (548 °C–949 °C) and HCl partial pressure P 0(HCl) (25–250 Pa). The cross-sectional width-to-depth aspect ratio of the etched trenches formed under the striped window along [010] decreased with increasing T and decreasing P 0(HCl). Secondary-ion mass spectrometry revealed slight diffusion of Si into β-Ga2O3 at T = 949 °C, while no diffusion was detected at T = 750 °C. These results provide practical guidelines for the fabrication of desired three-dimensional structures, such as fins/trenches, for high-performance β-Ga2O3-based power devices.