22 October 2020 in Metrologia
This paper presents a full characterization of a Dual Josephson Impedance Bridge (DJIB) at frequencies up to 80 kHz by using the DJIB to compare the best available impedance standards that are (a) directly traceable to the quantum Hall effect, (b) used as part of international impedance comparisons, or (c) believed to have calculable frequency dependence. The heart of the system is a dual Josephson Arbitrary Waveform Synthesizer (JAWS) source that offers unprecedented flexibility in high-precision impedance measurements. The JAWS sources allow a single bridge to compare impedances with arbitrary ratios and phase angles in the complex plane. The uncertainty budget shows that both the traditional METAS bridges and the DJIB have comparable uncertainties in the kilohertz range. This shows that the advantages of the DJIB, including the flexibility which allows the comparison of arbitrary impedances, the wide frequency range, and the automated balancing procedure, are obtained without compromising the measurement uncertainties. These results demonstrate that this type of instrument can considerably simplify the realization and maintenance of the various impedance scales. In addition, the DJIB is a very sensitive tool for investigating the frequency-dependent systematic-errors that can occur in impedance construction and in the voltage provided by the JAWS source at frequencies greater than 10 kHz.
18 December 2020 in IEEE Transactions on Quantum Engineering
Quantum computers with thousands or millions of qubits will require a scalable solution for qubit control and readout electronics. Colocating these electronics at millikelvin temperatures has been proposed and demonstrated, but there exist significant challenges with power dissipation, reproducibility, fidelity, and scalability. In this article, we experimentally demonstrate the use of a Josephson arbitrary waveform synthesizer (JAWS) to generate control signals at 4 K and perform spectroscopy of two components of a typical superconducting quantum information system: a linear resonator and a (nonlinear) transmon qubit. By locating the JAWS chip at 4 K and a qubit at 0.1 K, the direct path for quasi-particle poisoning from the JAWS chip to the qubit is broken. We demonstrate the stable, self-calibrated, and reproducible output signal of the JAWS when operated in its quantum locking range, a feature that allows these synthesizers to be replicated and scaled in the cryostat, all with identical on-chip, quantized, outputs. This is a proof-of-concept demonstration to generate signals at 4 K using driven superconducting electronics to control qubits at lower temperatures.
11 February 2019 in IEEE Transactions on Applied Superconductivity
We review our development of Josephson-junction-based programmable reference sources to synthesize spectrally-pure waveforms with quantum-based voltage accuracy for characterizing and improving future communication devices and systems. The goal is to provide sources that together span the entire radio frequency (RF) band, equivalent to seven orders of magnitude in frequency (20 kHz to 300 GHz). To synthesize waveforms in the microwave frequency band, we are extending the existing Josephson arbitrary waveform synthesizer (JAWS) technology used for ac voltage metrology at audio frequencies (<20 kHz). Using new microwave circuits and experimental techniques, we demonstrate JAWS-based synthesis of single-tone waveforms at 1 GHz, with -49 dBm output power and 79 dBc spur-free dynamic range (SFDR). To synthesize waveforms in the millimeter-wave frequency band, we are exploiting single flux quantum (SFQ) superconducting digital technology to design circuits that amplify SFQ pulses using a network of pulse splitters. With our initial SFQ-based circuit, we demonstrate synthesis of a 4 GHz sine wave with -74 dBm output power and 70 dBc SFDR.
1 December 2011 in Journal of Low Temperature Physics
1 August 2023 in APL Photonics
We demonstrate a sub-GHz resolution, fully programmable Fourier-domain pulse shaper capable of generating arbitrary optical pulse patterns for superconducting circuit platforms. This high resolution allows line-by-line pulse shaping of a 1 GHz-spaced comb, and the pulse shaper can accommodate an optical bandwidth as large as 1 THz, which represents the highest resolution programmable line-by-line pulse shaping to our knowledge. Linear optical sampling with a dual-comb system confirms independent control of 1 GHz-spaced optical lines, and the low phase noise of the pulse shaper is characterized. We apply the pulse shaper as an optical drive for an array of Josephson junctions operating at a temperature of 4 K, where cryogenic photodetection of pulse doublets with user-defined separation characterizes the Josephson junction response. Furthermore, we demonstrate a pulse-density modulation pattern of 4 ps duration optical pulses that can serve as the high bandwidth drive of a quantum-based Josephson arbitrary waveform synthesizer. By leveraging the exquisite control, large bandwidth, and low noise of photonics, this represents an important advance toward the realization of high power and high spectral purity AC voltage standards at gigahertz frequencies without requiring 100 GHz bandwidth driving electronics.
1 January 2020 in IEEE Transactions on Applied Superconductivity
In this article, we characterize the microwave behavior of superconductive circuits for quantum voltage standard applications at 4 K. For that, we develop a cryogenic multiline thru-reflect-line (TRL) calibration procedure to calibrate the microwave measurements at the 4 K on-wafer reference plane. We model superconductive circuits, including a Josephson array transmission line, compare simulated to TRL-calibrated measured results, and find excellent agreement up to 50 GHz.