This present study aims to investigate and compare the long-term stability of Ni-GDC and Ni-YSZ under three different electrolysis modes; steam electrolysis, co-electrolysis and CO2 electrolysis. Firstly, electrolyte-supported single cells of Ni-GDC (NiO-GDC//8YSZ//GDC//LSCF) and Ni-YSZ (NiO-GDC//8YSZ//GDC//LSCF) were fabricated and investigated using electrochemical impedance spectroscopy (EIS). Furthermore, the impedance data were also recorded under polarization (0.7 to 1.4V) as well as at OCV. Finally, stability tests of the single cells were carried out under steam (H2O:H2, 50:50), co- (H2O:CO2:CO, 40:40:20) and CO2 electrolysis (CO2:CO, 80:20) conditions at 900 °C with -0.5 A/cm2 current density. The results reveal that Ni-GDC exhibits higher current density and lower polarization resistance (Rp) than Ni-YSZ in all the electrolysis modes. Furthermore, the Ni-GDC cells show a lower degradation rate than Ni-YSZ. However, Ni migration and agglomeration were observed in both electrodes. The detailed electrochemical and microstructural properties of the operated cells will be presented and discussed.
4 June 2023 in International Journal of Hydrogen Energy
In this work, the performance, electrochemical processes, and stability of GDC (Ce0.8Gd0.2O1.9) fuel electrode containing single cells (GDC/8YSZ/GDC/LSCF) were examined in CO2 electrolysis conditions. The current density and area specific resistance is determined for different operation conditions. The examined cells showed a higher performance compared to state‐of‐the‐art Ni−YSZ fuel electrode (Ni‐YSZ/8YSZ/GDC/LSCF) based single cells with a similar production route. Furthermore, the cells were examined by means of electrochemical impedance spectroscopy (EIS) and the recorded data were evaluated by the distribution of relaxation times (DRT) analysis. An equivalent circuit model (ECM) consisting of four time constants and a Gerischer impedance (LR−RQ1−RQ2−G−RQ4−RQ5) was established to gain further insight into the individual processes in the cells. For instance, the low–frequency process P5 referring to RQ5 is the rate‐determining step in CO2 electrolysis and is assigned to a surface reaction including the charge transfer and possibly the gas diffusion in the GDC fuel electrode. A long–term stability test was performed in CO2 electrolysis conditions at 900 °C with a constant current load of −0.5 A ⋅ cm−2 for up to 1200 h. A degradation rate of 62 mV ⋅ kh−1 was observed. By EIS analysis, a similar contribution of the ohmic and polarization resistances to the degradation was determined. The low–frequency process P5 and thus the surface reaction including the charge transfer in the GDC fuel electrode is contributing most to the increase in polarization resistance. After the long–term stability test, scanning electron microscopy (SEM) analysis was carried out and a coarsening of GDC particles in the fuel electrode was observed.
22 May 2024 in International Journal of Hydrogen Energy