8 October 2015 in Chemical Society Reviews
This review considers defect chemistry of TiO2and defect-related properties associated with solar energy conversion.
6 October 2011 in Energy & Fuels
6 March 2012 in The Journal of Physical Chemistry C
10 June 2015 in Materials Science Forum
Iron and steelmaking are two of the largest energy intensive industries with the highest growth rate in energy consumption of all energy utilisation sectors. In order to meet the growing greenhouse challenges, incorporation of renewable resources to the existing and emerging metallurgical operation are desirable. In this respect, agricultural wastes can be potentially applied as fuel for ironmaking process to stabilise the greenhouse emissions as it is renewable and CO2 neutral. Thus, the present study investigates the reduction behavior of iron ore minerals and growth of metallic iron in reduction process. The process was utilized palm shells char (pyrolyzed) as reducing agent at high temperature (1000°C) with inert gas oxygen within 2 hours of reduction reactions. Reducing agent plays a vital role in the reduction process where metallic iron was produced. After the reduction for sample mass ratio of 30:70 palm char over iron ore blend. Metallic iron produced was detected by XRD pattern as well as the other oxides through SEM/EDS analysis. The result indicates that palm shells char can be used as reducing agent by producing metallic iron effectively. The beneficial effect on the environment through decrease use of coke/coal consumption and carbon dioxide emissions in steelmaking process.
6 March 2017 in Materials Science Forum
MRMuhammad Fadhlullah Al-Amin Abdul Razak
Muhammad Fadhlullah Al-Amin Abdul Razak
The microstructure and mechanical properties of zirconia toughened alumina (ZTA) ceramic added with niobia (Nb2O5) through cold isostatic pressing (CIP) method was investigated. The amount of Nb2O5 is varied from 0 wt.% to 7 wt.%. The phase composition of the sintered bodies was analyzed with an x-ray diffractometer, while their microstructure was observed with a scanning electron microscope. It is found that up to 3 wt.% of Nb2O5 addition, the secondary phase of Nb2Zr6O17 presence as square shape particles confirm by SEM and EDX. The addition of 3 wt.% showed the highest Vickers hardness value with 1600HV. It was observed that, further addition of Nb2O5 (> 3 wt.% ) deteriorates the Vickers hardness of ZTA. While the fracture toughness value increased at 3 wt.% until 5 wt.% of Nb2O5 addition (6.71 MPa · √m and 6.80 MPa · √m respectively). It was also found that the value for bulk density increased and porosity decreased with the increasing of Nb2O5 addition.
10 June 2015 in Materials Science Forum
SJShamsul Baharin Jamaludin
Shamsul Baharin Jamaludin
The potential converting the end-life product into a renewable source and replaced the conventional material found in iron and steelmaking production next tackled the world’s most problematic waste stream. Generally, integrating the waste material becomes wealth only available to certain wastes industries due to high temperature application. Recycling waste materials were introduced in order to control slag foaming in EAF steelmaking. The present paper reviews about slag foaming behaviour focused on slag droplet volume (Vt/V0 ratio), their transformation and morphology during carbon/slag interaction using sessile-drop technique at 1550°C on polymeric (HDPE), agricultural waste (palm shell), rubber tyres and metallurgical coke as the potential carbonaceous materials in EAF steelmaking. These results indicate that partial replacement of conventional materials with recycled waste materials is efficient due to improved interactions with EAF slag.