12 June 2024 in Nature Materials
1 August 2020 in Materialia
9 January 2023 in Advanced Optical Materials
Structural colors based on dielectric metasurfaces are attractive because of their potential application in next‐generation color printing. However, the commonly used dielectric materials suffer from issues of high light absorption (e.g., Si at blue wavelength) and low resistance to corrosion (e.g., titanium oxide), which greatly limit their application as structural color for information encryption. Here, dielectric‐metasurface‐based structural color constructed on nanocrystalline diamond (NCD) film by using bias enhanced nucleation (BEN) technique is demonstrated. Owing to the formation of highly crystalline diamond by the BEN process, the synthesized NCD film with a thickness of ~500 nm exhibits excellent optical quality with a relatively high refractive index that produces a strong magnetic dipole mode by Mie resonance. To realize the dynamic functionalities of diamond‐metasurface color with high resolution, a periodic array of asymmetric diamond cuboids with high aspect ratio (≈3.1) is fabricated, which produces polarization‐dependent response due to the enhanced Mie resonance. By optimizing the configuration of the diamond‐metasurface system, the color performance is improved with high brightness and a relatively wide gamut. This work demonstrates for the first time that NCD can serve as a robust and highly tunable dielectric platform for application in information encryption.
26 August 2021 in Advanced Materials
Temperature‐dependent transport measurements are performed on the same set of chemical vapor deposition (CVD)‐grown WS2 single‐ and bilayer devices before and after atomic layer deposition (ALD) of HfO2. This isolates the influence of HfO2 deposition on low‐temperature carrier transport and shows that carrier mobility is not charge impurity limited as commonly thought, but due to another important but commonly overlooked factor: interface roughness. This finding is corroborated by circular dichroic photoluminescence spectroscopy, X‐ray photoemission spectroscopy, cross‐sectional scanning transmission electron microscopy, carrier‐transport modeling, and density functional modeling. Finally, electrostatic gate‐defined quantum confinement is demonstrated using a scalable approach of large‐area CVD‐grown bilayer WS2 and ALD‐grown HfO2. The high dielectric constant and low leakage current enabled by HfO2 allows an estimated quantum dot size as small as 58 nm. The ability to lithographically define increasingly smaller devices is especially important for transition metal dichalcogenides due to their large effective masses, and should pave the way toward their use in quantum information processing applications.
12 November 2022 in Acta Materialia
5 February 2007 in Applied Physics Letters
An ultrawide band quantum dot (QD) light emitting device (LED) with bandwidth of covering spectral range has been demonstrated by postfabrication laser-irradiation technique. The integrated light output of the QD LED was found to increase by four times after laser annealing, attributed to the improved homogeneity of the QDs and enhanced lateral electrical and optical confinements at the active region after intermixing. Large wavelength blueshift of has been obtained at the laser annealed region and an overall increase in bandwidth of 22% has been obtained in the QD LED after postfabrication laser annealing.