Ulrich Schultheiss

Ulrich Schultheiss

Auto-generated profile, based on publicly available information

Ulrich Schultheiss

Ostbayerische Technische Hochschule Regensburg

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 November 2025 in ECS Advances
Verified
Journal Article
Open access
LELukas Esper
Lukas Esper
USUlrich Schultheiss
Ulrich Schultheiss
MGMarius Grad
Marius Grad
UNUlf Noster
Ulf Noster
ABAndreas Bund
Andreas Bund
Additively processed materials are increasingly used to manufacture customized parts, e.g. medical implants. Implant surfaces often require a smooth finish, which can be achieved by post-processing and well-defined process parameters. In this study, the effects of electropolishing of metal parts produced by laser powder bed fusion are investigated using Hull cell experiments and a three-electrode setup. Current density voltage curves were measured with the three-electrode setup to identify the regimes for electropolishing. Subsequently different constant-currents were applied and Hull cell experiments were conducted. The surface roughness (Sz, Sa) and the mass removal were analysed. Surface morphologies were assessed using laser scanning and scanning electron microscopy. A reduction of the initial surface roughness of more than 90% to Sa < 0.3 μm has been achieved. Considering the passed electrical charge during electropolishing, results from Hull cell experiments are systematically correlated with current-controlled electropolishing. This approach enables the precise tailoring of polishing parameters to achieve surfaces with defined roughness. Furthermore, the study demonstrates the suitability of Hull cells in determining electropolishing parameters for additive materials and highlights their contribution to post-processing in additive manufacturing.

20 May 2026 in ECS Advances
Verified
Journal Article
Open access
JKJessica Kloiber
Jessica Kloiber
USUlrich Schultheiß
Ulrich Schultheiß
JMJohanna Michel
Johanna Michel
HHHelga Hornberger
Helga Hornberger
Electropolishing magnesium materials is challenging due to the strong susceptibility of magnesium to corrosion in aqueous electrolytes. Deep eutectic solvents (DES) represent a less aggressive alternative, but their electrochemical behavior toward magnesium is not well understood. In this study, Ethaline, Glyceline and Reline were systematically investigated as electrolytes for the electropolishing of a magnesium material. The process parameters from traditional phosphoric acid systems were adapted and optimized to DES regarding electrolyte temperature and agitation as well as specimen position and orientation. Electropolishing was conducted at 1700 mV vs. Ag/AgCl (3M) and 18 C/cm², employing elevated temperature (80°C), rapid stirring of the electrolyte and positioning the sample surface perpendicular to the electrolyte flow with repeated 180° specimen rotation. The optimized DES systems produced smooth, mirror-like, nearly defect-free and corrosion-resistant surfaces comparable to those obtained with acidic electrolytes. Additionally, DES enabled high-purity surfaces, reduced polishing times, and excellent reproducibility. Ethaline achieved the best surface quality despite strong driving forces for anodic film formation, whereas Glyceline and Reline showed promising results for further optimization. The findings reveal new insights into the anodic behavior of magnesium in DES and establish them as viable electrolytes for sustainable and high-performance electropolishing of magnesium materials.

15 October 2026 in ECS Advances
Verified
Journal Article
Open access
LELukas Esper
Lukas Esper
USUlrich Schultheiss
Ulrich Schultheiss
UNUlf Noster
Ulf Noster
ABAndreas Bund
Andreas Bund
Additive manufacturing (AM) enables the fabrication of complex geometries with high design flexibility. However, the resulting as-built surface quality often requires post-processing to meet functional requirements, particularly for inclined and overhanging features. Achieving defined surface roughness while maintaining near-net-shape geometry is essential. In this study, 316L austenitic stainless-steel samples produced by laser powder bed fusion were electropolished in the transpassive regime at varying passed charges. Surface roughness and thickness reduction were analyzed, and both a predictive model for roughness evolution and a finite element model (FEM) using COMSOL® Multiphysics for thickness reduction were developed. Validation of the roughness model shows good overall agreement. While the maximum height parameter (Sz) exhibits moderate deviations, the arithmetic mean roughness (Sa) is reproduced with high accuracy. Validation of the FEM for thickness reduction shows good overall agreement, with more than 92% of the experimental data for build angles of 75° and 90° being captured by the simulation. Overall, the results demonstrate that surface roughness evolution and the predictive agreement of the thickness-reduction model are influenced by the initial surface morphology and build angle. The combined experimental and modeling approach enables the prediction of electropolishing-induced surface evolution and material removal within the investigated process conditions.