20 December 2019 in IEEE Access
This study proposes a novel signal processing method for detecting the vital signs of multiple adjacent subjects using a 24 GHz frequency modulated continuous wave Doppler radar. Radar-based vital signs sensors have attracted significant attention because of their contactless and unobtrusive mode of measurement. However, limited-bandwidth, fixed-beam systems have been restricted to single subjects because a high resolution is required to detect the vital signs of multiple adjacent subjects. As the range resolution is determined by the frequency bandwidth, a novel method is proposed that doubles the effective frequency bandwidth by using a modified waveform. The proposed method can distinguish between two subjects sitting 40 cm apart, overcoming the 60 cm Rayleigh resolution for a frequency bandwidth of 250 MHz. The computational complexity of the proposed method is considerably low when compared with high-resolution algorithms such as the multiple signal classification algorithm. Furthermore, the method easily suppresses stationary clutter by using phase deviation. To validate the performance of the proposed method, experiments were conducted with two subjects lying side by side on a bed. The results indicate the excellent performance, with enhanced range and high detection accuracy. This method has many potential applications, including monitoring infants and sleep apnea patients.
29 March 2019 in IEEE Transactions on Biomedical Circuits and Systems
In this paper, a radio frequency vital sign sensor based on double voltage-controlled oscillators (VCOs) combined with a switchable phase-locked loop (PLL) is proposed for a noncontact remote vital sign sensing system. Our sensing system primarily detects the periodic movements of the human lungs and the hearts via the impedance variation of the resonator. With a change in impedance, both the VCO oscillation frequency and the PLL feedback voltage also change. Thus, by tracking the feedback voltage of the PLL, breath and heart rate signals can be acquired simultaneously. However, as the distance between the body and the sensor varies, there are certain points with minimal sensitivity, making it is quite difficult to detect vital signs. These points, called impedance null points, periodically occur at distances proportional to the wavelength. To overcome the impedance null point problem, two resonators operating at different frequencies, 2.40 and 2.76 GHz, are employed as receiving components. In an experiment to investigate the sensing performance as a function of distance, the measurement distance was accurately controlled by a linear actuator. Furthermore, to evaluate the sensing performance in a real environment, experiments were carried out with a male and a female subject in a static vehicle. To demonstrate the real-time vital sign monitoring capability, spectrograms were utilized, and the accuracy was assessed relative to reference sensors. Based on the results, it is demonstrated that the proposed remote sensor can reliably detect vital signs in a real vehicle environment.
14 March 2021 in Journal of Electromagnetic Waves and Applications
This study presents the micro-Doppler signature (MDS) of small drones based on resonance phenomena. The MDS analysis of a drone is conducted for various detection conditions. The Doppler frequencies due to the rotation of rotor blades, characterized by different materials and dimensions, are extracted at specific angular frequencies. It is confirmed that the resonance phenomenon caused by the copper-coated conducting rotor blade significantly affects the Doppler frequency. As the rotor blade dimension increases, the resonance effect moves to a lower frequency band. It is interesting to note that the resonance effect of horizontal to horizontal (HH) polarization occurs in a lower frequency band compared to vertical to vertical (VV) polarization. Additionally, it is performed in a monostatic and bistatic radar environment to analyze the resonance effect. The theoretical analysis based on full-wave simulation is confirmed via measurements with frequency-modulation continuous wave (FMCW) radar.
1 January 2026 in IEEE Antennas and Wireless Propagation Letters