30 September 2021 in Technobius
The paper describes the technology of manufacturing a construction product by vibrocompression using ash and slag waste from thermal power plants in the Pavlodar region. The task of the experimental research was to obtain a hollow wall stone based on ash and slag waste with a strength grade that is not inferior to products made according to the traditional recipe. The obtained samples with different ratios of components in the mixture were investigated for compressive strength, moisture absorption, frost resistance. It has been established that when ash and slag waste are added to the composition of the concrete mixture in an amount of up to 35 % of the mass of dry components, the strength characteristics of the hollow wall stone correspond to the selected brand.
30 June 2022 in Technobius
With the development of modern society, technological progress does not stand still. Mankind is constantly in search of new ideas and ways of implementation. This article of the authors is part of the modernization of the existing system of production of building materials. The authors propose to use secondary raw materials for the manufacture of a standard product, confirm them with laboratory tests and results. The indicators of the modified concrete mixture with the addition of ash-and-slag waste from the local industrial sector gave a density not inferior to the heavy concrete of 1.8 g/cm3. Positive effect is obtained by using hydraulic press, where at equal ratio of components due to pressing, all samples were transferred to a number of heavy concretes with a density of 1.8 to 2.5 g/cm3. Moreover, it was found that there are reserves of cement saving in the application of ash in the case of samples prepared by means of hydraulic press, as well as to correct the composition of concrete it is required to carry out a full-scale experiment with the joint action of vibration and pressing. Strength tests of samples show that there is an optimum quantity of ash and slag in the formulation, at that not only the standard requirements for the quality of construction products are met, but also exceeds some characteristics of products according to the requirements of standards.
17 March 2022 in Technobius
In this work, the objects of research are cement asphalt concrete obtained on the basis of cement binder and bitumen emulsion, using as mineral additives, waste from thermal power plants, in the form of fuel ash of various types. The analysis of foreign and domestic literature on this topic is carried out. In order to reduce the amount of inorganic binder (cement) consumed, as well as modification of organic binder (bitumen emulsion), fuel ashes of two domestic producers, ashes of CHP-2 and CHP-3 of Pavlodar based on Ekibastuz coals, were studied in the work. The influence of fuel ash on the properties of binders used in the work, as well as the properties of cement asphalt concrete compositions based on binders using fuel ash, has been established. The features of the production of cement asphalt concrete using fuel ash are described. The results of testing cement asphalt concrete without the use and with the use of fuel ash are presented.