28 January 2020 in Biomacromolecules
Three-dimensional (3D) printing has been an emerging technique to fabricate precise scaffolds for biomedical applications. Cellulose nanofibril (CNF) hydrogels have attracted considerable attention as a material for 3D printing due to their shear-thinning properties. Combining cellulose nanofibrils hydrogels with alginate is an effective method to enable cross-linking of the printed scaffolds in the presence of Ca2+ ions. In this work, spherical colloidal lignin particles (CLPs, also known as spherical lignin nanoparticles) were used to prepare CNF-alginate-CLP nanocomposite scaffolds. High-resolution images obtained by atomic force microscopy showed that CLPs were homogeneously mixed with the CNF hydrogel. CLPs brought antioxidant properties to the CNF-alginate-CLP scaffolds in a concentration-dependent manner and increased the viscosity of the hydrogels at a low shear rate, which provide better shape fidelity and printing resolution to the scaffolds. Interestingly, the CLPs did not affect the viscosity at high shear rates, showing that the shear thinning behavior typical for CNF hydrogels was retained, enabling easy printing. The CNF-alginate-CLP scaffolds demonstrated shape stability after printing, cross-linking and storage in Dulbecco’s phosphate buffer solution containing Ca2+ and Mg2+ ions, up to 7 days. The 3D printed scaffolds showed relative rehydration ratio values above 80 % after freeze-drying, demonstrating a high water retaining capability. Cell viability tests using hepatocellular carcinoma cell line HepG2 showed no negative effect of CLPs on cell proliferation. Fluorescence microscopy indicated that HepG2 cells grew not only on the surface, but also inside the porous scaffold. Overall, our results demonstrate that nanocomposite CNF-alginate-CLP scaffolds have high potential in soft tissue engineering and regenerative medicine applications.
22 May 2019 in Biomacromolecules
NENazanin Zanjanizadeh Ezazi
Nazanin Zanjanizadeh Ezazi
+1
Nanocellulose has been demonstrated as a suitable material for cell culturing, given its similarity with extracellular matrices. Taking advantage of the shear thinning behavior, nanocellulose suits 3D printing into scaffolds that support cell attachment and proliferation. Here we propose aqueous suspensions of acetylated nanocellulose of low degree of substitution for direct ink writing (DIW). This benefits from the heterogeneous acetylation of precursor cellulosic fibers, which eases their deconstruction and confers the characteristics required for extrusion in DIW. Accordingly, the morphology of related 3D-printed architectures and their performance during drying and rewetting as well as interactions with living cells are compared with those produced from typical unmodified and TEMPO-oxidized nanocelluloses. We find that a significantly lower concentration of acetylated nanofibrils is needed to obtain bioinks of similar performance, affording more porous structures. Together with their high surface charge and axial aspect, acetylated nanocellulose produces dimensionally-stable, monolithic scaffolds that support drying and rewetting, required for packaging and sterilization. Considering potential uses in cardiac devices, we discuss the interactions of the scaffolds with cardiac myoblast cells. Attachment, proliferation and viability for 21 days are demonstrated. Overall, the performance of acetylated nanocellulose bioinks opens the possibility for reliable and scale up fabrication of scaffolds appropriate for studies on cellular processes and for tissue engineering.
21 September 2018 in Biomacromolecules
1 July 2020 in Advanced Functional Materials
NENazanin Zanjanizadeh Ezazi
Nazanin Zanjanizadeh Ezazi
+3
A biomaterial system incorporating nanocellulose, poly(glycerol sebacate), and polypyrrole is introduced for the treatment of myocardial infarction. Direct ink writing of the multicomponent aqueous suspensions allows multifunctional lattice structures that not only feature elasticity and electrical conductivity but enable cell growth. They are proposed as cardiac patches given their biocompatibility with H9c2 cardiomyoblasts, which attach extensively at the microstructural level, and induce their proliferation for 28 days. Two model drugs (3i‐1000 and curcumin) are investigated for their integration in the patches, either by loading in the precursor suspension used for extrusion or by direct impregnation of the as‐obtained, dry lattice. In studies of drug release conducted for five months, a slow in vitro degradation of the cardiac patches is observed, which prevents drug burst release and indicates their suitability for long‐term therapy. The combination of biocompatibility, biodegradability, mechanical strength, flexibility, and electrical conductivity fulfills the requirement of the highly dynamic and functional electroresponsive cardiac tissue. Overall, the proposed cardiac patches are viable alternatives for the regeneration of myocardium after infarction through the effective integration of cardiac cells with the biomaterial.
22 January 2020 in ACS Applied Materials & Interfaces
NENazanin Zanjanizadeh Ezazi
Nazanin Zanjanizadeh Ezazi
+4
Heart tissue engineering is critical in the treatment of myocardial infarction, which may benefits from drug-releasing smart materials. In this work, we load a small molecule (3i-1000) in new biodegradable and conductive patches for application in infarcted myocardium. The composite patches consist of a biocompatible elastomer, poly (glycerol sebacate) (PGS), coupled with collagen type I, used to promote cell attachment. In addition, polypyrrole is incorporated for its electrical conductivity and to induce cell signaling. Results from in vitro experiments indicate a high density of cardiac myoblast cells attached on the patches, which stay viable for at least one month. The degradation of the patches does not show any cytotoxic effect while 3i-1000 delivery induces cell proliferation. Conductive patches show high blood wettability, and drug release, correlating with the rate of degradation of the PGS matrix. Together with the electrical conductivity and elongation characteristics (30 % in the wet state), the developed biomaterial fits the mechanical, conductive, and biological demands required for cardiac treatment.
7 August 2019 in Advanced Functional Materials