This study presents an enhanced tribo‐hygroelectric generator (THEG) capable of efficiently converting mechanical and atmospheric water energies into direct current (DC) power. The device utilizes water‐infused porous cellulose (WIPC) as the active layer, sandwiched between two electrodes with different work functions (e.g., aluminum and copper). Electricity generation originates from the synergistic effects of triboelectric charge excitation and Schottky junction–induced charge separation at the Al/WIPC interface. The hydrogen‐bonded network formed between water molecules and cellulose functional groups establishes an efficient pathway for charge transport, while mechanical compression reduces the Schottky barrier height, enhances carrier density, and lowers internal resistance. As a result, the optimized THEG achieved a peak current of 4.46 mA and a current density of 11.15 A/m 2 , representing a threefold enhancement over the previous sliding‐type design. Although the output voltage of a single cell is modest, a series of 10 cells generated 4.2 V—sufficient to power small electronic devices such as light‐emitting diodes (LEDs), calculators, and DC motors. Moreover, the THEG demonstrated excellent sensing performance for applied pressure and compression rate, exhibiting strong linear correlations (R 2 ≥ 0.99). These findings underscore the potential of THEG as a sustainable and multifunctional platform for sustainable energy harvesting, self‐powered sensing, and practical low‐voltage power applications.
30 March 2026 in International Journal of Precision Engineering and Manufacturing-Green Technology
Accurate parameterization of physics-based lithium-ion battery models is essential for reliable prediction of internal battery states, but repeated multiphysics model evaluations during optimization make parameter identification computationally demanding. Data-driven surrogates offer a promising alternative, but high predictive accuracy on test data does not necessarily imply reliable optimization, because surrogate errors in the regions explored during parameter search can alter the ranking of candidate solutions. This study evaluates this issue for an electrochemical–thermal–aging model of a commercial prismatic cell by comparing responseseries reconstruction and direct error-metric prediction within a unified surrogate-assisted identification framework. The results reveal that response-series surrogates provided more reliable parameter identification than direct error prediction, while the identified solutions also revealed parameter non-uniqueness, with different parameter combinations producing similar measurable responses. Individual surrogate evaluations were accelerated by several orders of magnitude, but the end-to-end identification speedups were limited to 3.97-fold and approximately 5.9-fold for the electrochemical–thermal and aging stages, respectively. Validation outside the calibration domain showed reasonable predictive performance under low C-rate conditions, although larger discrepancies remained in the temperature response. Beyond approximately 600 cycles, the experimental degradation increasingly diverged from the SEI and lithium plating degradation model, indicating when the existing degradation description begins to lose physical adequacy and when additional aging mechanisms may need to be considered