Yandong Wang

Yandong Wang

Auto-generated profile, based on publicly available information

Yandong Wang

Key Laboratory of the Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xian, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BDbaoxing duan
baoxing duan
LYLuoyun Yang
Luoyun Yang
YWYandong Wang
Yandong Wang
Yintang YangYintang Yang
Yintang Yang
A depletion-mode AlGaN/GaN high electron mobility transistors (HEMTs) have been proposed in this article with the partial GaN cap, which applies the electric field modulation effect to optimize the surface electric field and two-dimensional electron gas (2DEG) distribution. The 2DEG density under the partial GaN cap is reduced due to the polarization effect formed by the partial GaN cap and AlGaN layers. The surface electric field is reshaped by the electric field modulation effect due to the partial GaN cap, featuring an extra electric field peak far away from the gate edge, which, therefore, improves the breakdown voltage (BV). Moreover, the output current ( I DS ) is also improved slightly resulting from the increased mobility of 2DEG, which compensates for the decrease in the 2DEG density. The experimental BV is increased greatly from 378 V for the conventional AlGaN/GaN HEMTs to 656 V for the depletion-mode partial cap layer AlGaN/GaN HEMTs because of the optimized surface electric field by the electric field modulation effect. The maximum output current ( I max ) is increased from 538 to 558 mA/mm. It is concluded that the BV can be improved significantly and I DS increased slightly for AlGaN/GaN HEMTs by the electric field modulation technique using the partial GaN cap, which optimizes the BV and specific ON-resistance ( R ON,sp ) simultaneously.

10 February 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BDbaoxing duan
baoxing duan
YWYandong Wang
Yandong Wang
LSLicheng Sun
Licheng Sun
Yintang YangYintang Yang
Yintang Yang
In this article, new structures are proposed with an extra electrode for accumulation-mode vertical double-diffused metal-oxide semiconductor (VDMOS) (EA VDMOS) and a gate electrode for accumulation-mode VDMOS (GA VDMOS). For accumulation-mode VDMOS, the drift region is lightly doped to support drain voltage in the OFF-state. A large density of electrons is accumulated to modulate the conductivity of the drift region in the ON-state. It is contradictory to obtain high breakdown voltage (BV) and low specific ON-resistance (RON,sp) in the conventional VDMOS, because both of them depend on the doping concentration of the drift region. This contradictory relationship between the BV and RON,sp is eliminated for EA and GA VDMOS, thereby breaking the superjunction (SJ) silicon limit. Simulation results indicate that RON,sp of the accumulation-mode VDMOS devices are significantly reduced. The RON,sp of EA and GA VDMOS can be reduced by 60% (0.85 mΩ · cm²) and 30% (1.68 mΩ · cm²) compared with the SJ VDMOS (2.41 mΩ · cm²) at the BV of 600 V, respectively. In addition, the performance of the accumulation-mode VDMOS is independent of charge balance which is necessary for the SJ VDMOS.

10 February 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BDbaoxing duan
baoxing duan
JYJiahui Yuan
Jiahui Yuan
YWYandong Wang
Yandong Wang
LYLuoyun Yang
Luoyun Yang
Yintang YangYintang Yang
Yintang Yang
The traditional GaN high electron mobility transistor (GaN HEMT) is in the ON-state under zero gate bias, which does not meet the requirements of practical application. Therefore, in the application, it is necessary to continuously increase the negative voltage to the power grid to stop the equipment, which will increase the system cost and limit the improvement of system reliability. Therefore, the realization of enhanced AlGaN/GaN HEMT is of great significance. In order to further improve the breakdown characteristics and get a positive threshold voltage for GaN HEMT, a new enhance-mode junction AlGaN/GaN HEMT (EM-AlGaN/GaN JFET) structure is proposed in this article for the first time with the high breakdown voltage (BV) by introducing p-GaN buried layer into GaN epitaxial buffer layer to form p-n junction. The Sentaurus TCAD software is used to simulate the EM-AlGaN/GaN JFET. The simulation results show that the positive threshold voltage ( ${V}_{\text{th}}$ ) of 1.21 V is obtained, while the BV of the novel EM-AlGaN/GaN JFET is about 1283 V. The corresponding low-specific ON-resistance ${R}_{ \mathrm{\scriptscriptstyle ON},\text{sp}}$ is 2.44 m $\boldsymbol {\Omega } \cdot $ cm 2 . The switching device figure of merit (FOM) is further improved. The FOM of 679 MW $\cdot $ cm −2 (FOM = BV 2 / ${R}_{ \mathrm{\scriptscriptstyle ON},\text{sp}}$ ) is 1.52 times of the FOM (447 MW $\cdot $ cm −2 ) of conventional AlGaN/GaN HEMT. We can see that the introduction of p-GaN reduces the concentration of two-dimensional electron gas (2DEG) in the ON-state. In the OFF-state, the gate of the p-n junction forms a higher built-in potential and modulates the electric field distribution to get high BV. Due to the heterojunction polarized 2DEG, it has a lower ${R}_{ \mathrm{\scriptscriptstyle ON},\text{sp}}$ than the conventional GaN JFET. It has a good application prospect in the field of power electronic devices.

1 October 2018 in Superlattices and Microstructures
Verified
Journal Article
Closed access
LSLicheng Sun
Licheng Sun
BDbaoxing duan
baoxing duan
XYXin Yang
Xin Yang
YWYandong Wang
Yandong Wang
Yintang YangYintang Yang
Yintang Yang

20 February 2020 in Solid-State Electronics
Verified
Journal Article
Closed access
ZDZiming Dong
Ziming Dong
BDbaoxing duan
baoxing duan
MLMingzhe Li
Mingzhe Li
YWYanDong Wang
YanDong Wang
Yintang YangYintang Yang
Yintang Yang

30 August 2022 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
BDbaoxing duan
baoxing duan
ZZZiyu Zhou
Ziyu Zhou
YWYandong Wang
Yandong Wang
Yintang YangYintang Yang
Yintang Yang
In order to reduce the specific ON resistance ( $\text{R}_{\mathbf {{ \mathrm{\scriptscriptstyle ON}},sp}}$ ) of power device in the drift region, the folded accumulation lateral double-diffused MOSFET (FALDMOS) is manufactured and analyzed in this article. The drift region of the FALDMOS is etched to form the folded surface, which is similar to the FinFET structure. The oxide inside the trench optimizes the electric field in the drift region, so the doping concentration can be increased while maintaining the breakdown voltage (BV). In addition, the trench increases the area of the drift region covered by the extended gate electrode, which can introduce more accumulated electrons when the device is turned on. The increased doping concentration and accumulated electrons work together to substantially increase the conductivity of the drift region, thereby obtaining ultralow $\text{R}_{ \mathrm{\scriptscriptstyle ON},sp}$ . Furthermore, the folded accumulation LDMOS with split gate (FSLDMOS) is proposed to solve the phenomenon that the BV of the FALDMOS cannot be improved by increasing the drift length with the fixed oxide thickness. The polysilicon above the drift region is etched apart to form an extended gate and a split electrode. The electric field concentration near the drain can be alleviated by adjusting the bias on the split electrode. The FALDMOS and FSLDMOS are manufactured by the 0.35- $\mu \text{m}$ BCD technology and the key processes, such as trench etching and polysilicon filling, are shown. The experimental results show that $\text{R}_{ \mathrm{\scriptscriptstyle ON},sp}$ of the FALDMOS is only 9.3 $\text{m}\Omega \cdot $ mm2, while that the conventional LDMOS is 36.2 $\text{m}\Omega \cdot $ mm2, which is reduced by 74.3% with the same BV of 36 V. Moreover, the current density of FALDMOS is five times higher than that of the conventional LDMOS in the same areas. The BV of the FSLDMOS is improved by 66% compared with FALDMOS.