The current research project consisted of discoloring water contaminated by the textile dye Red TS3B, utilizing ultraviolet radiation and ZnO as a photocatalyst, towards this end, a spectrophotometric method for the quantification of dye was validated, and this method presented an adequate linearity and sensibility. For the discoloration trial run, a factorial design (22), in order to optimize the experimental factors of pH and ZnO dosage per 250 mL of solution, was executed. The best discoloration was achieved at 180 minutes of photocatalytic reaction, when it worked with a pH of 11 and a dosage of 0.2 g of ZnO per 250 mL of colored solution, achieving a degradation percentage of 97.5 % of dye in solution.
1 January 2025 in Journal of the Brazilian Chemical Society
The objective of this research study was to compare the conventional exhaustion method (CN) and the ultrasound-assisted depletion method (US) in the dyeing of alpaca fibers with azo textile dyes Synozol Red K3BS and Novacron Navy FN-BN. The analytical method was validated by UV-Vis spectroscopy, which demonstrated adequate linearity and sensitivity. To optimize US, a 32 factorial design was carried out with temperature factors of 60, 70 and 80 °C, using Baby alpaca, Fleece and Huarizo fibers, which determined that Baby dyeing at 80 °C maximizes exhaustion of the dyes. These parameters were used to compare US with CN using the F-test and t-test, which indicated no statistically significant difference the depletion of the dyes in both methods. Different color fastness tests were performed in both methods using digital images. The paired t-test was also performed, resulting in a p-value greater than 0.05, which shows that US does not compromise the color fastness of the fibers.
This research study aimed to isolate and characterize a new bacterial strain from textile effluents. In order to do this, bacteria were cultured using the MSM medium, where a colony was isolated through six successive pickings. It then underwent a DNA extraction process using the phenol-chloroform-isoamyl alcohol methodology, and an electrophoresis was carried out to confirm the extraction. In addition, the isolated colony was identified as Klebsiella sp. by sequencing the 16S rRNA gene using bioinformatics tools. To observe its biotechnological potential, the bacterial strain was grown in an MSM broth enriched with Golden Yellow K2R azoic dye at a concentration of 50 mg/L, showing a percentage of decolorization of 74 % after 72 hours at 37 °C, indicating the potential of the isolated colony for the development of bio-remediation processes for effluents containing azoic dyes.
This research study aimed to isolate and characterize a new bacterial strain from textile effluents. To do this, bacteria were cultured using the MSM medium, where a colony was isolated through six successive pickings. It then underwent a DNA extraction process using the phenol-chloroform-isoamyl alcohol methodology, and an electrophoresis was carried out to confirm the extraction. In addition, the isolated colony was identified as Klebsiella sp. by sequencing the 16S rRNA gene using bioinformatics tools. To observe its biotechnological potential, the bacterial strain was grown in an MSM broth enriched with Golden Yellow K2R azoic dye at a concentration of 50 mg/L, showing a percentage of decolorization of 74 % after 72 hours at 37 °C, indicating the potential of the isolated colony for the development of bio-remediation processes for effluents containing azoic dyes. Keywords: Bacterial strain, Klebsiella sp., DNA extraction, decolorization, effluents.
This research aimed to identify optimal studied variables for chromium (VI) removal using four resins (IRA 96, IRA 400, DOWEX 1x8, and LEWATIT). A 1,5-diphenylcarbazide method was used for the quantification of chromium (VI). A factorial design with triple replication at the center point was used to evaluate pH, resin dose (g/100 mL), and initial chromium (VI) concentration. The optimal values for the four resins were a pH of 3, a resin concentration of 0.15 g/100 mL of solution, and an initial concentration of 10 mg/L of chromium. Then, an ANOVA study was done to compare the resins results using a p-value <0.05. The DOWEX resin presented the highest removal percentage (98.39%) for a reaction period of 45 minutes, with an exponential model that fits a pseudo-first-order kinetics with a coefficient of determination equal to 0.967.