22 September 2023 in Materials Today
22 October 2021 in Journal of Physics D: Applied Physics
Over the past decade, there has been a significant advancement in understanding the mechanics of silicon (Si) electrodes in lithium (Li)-ion batteries. Much of this interest in Si electrodes as ideal anode materials for high-capacity Li-ion batteries stems from its theoretical specific capacity of 4200 mAh g−1, which is an order-of-magnitude higher than that of conventional graphite electrodes (372 mAh g−1). However, the high capacity of Li ions is also accompanied by a ∼300% volume expansion of the Si electrode during Li intercalation, which results in massive cracking of the electrode and capacity fade. In this review article, we summarize recent progress in elucidating the underlying fracture and failure mechanics of Si electrodes using multiscale computations and experiments, spanning the quantum, atomistic, microscopic, and macroscopic length scales. We focus on four fundamental mechanics issues: (i) the mechanical properties and fracture behavior of lithiated Si electrodes; (ii) the interfacial mechanics between Si thin-film electrodes and current collectors; (iii) the deformation and failure mechanics of the solid electrolyte interphase; and (iv) the design of Si electrodes for improved mechanical performance. Current challenges and possible future directions for the field of mechanics of materials in pursuit of high-capacity rechargeable batteries are also discussed.
8 June 2023 in Journal of Materials Chemistry B
Flexible electrochemical sensors that measure the concentrations of specific analytes (e.g., ions, molecules, and microorganisms) provide valuable information for medical diagnosis, personal health care, and environmental monitoring. However, the conductive electrodes of such sensors need to be exposed to the surrounding environments like chloride-containing aqueous solutions during their operation, where chloride ions (Cl−) can potentially cause corrosion and dissolution of the sensors, negatively impacting their performance and durability. In this work, we develop soft, flexible conductivity sensors made of gold (Au) electrodes and systematically study their electrochemical behaviors in sodium chloride (NaCl) solutions to prevent chloride-induced corrosion and enhance their sensitivity for marine environmental monitoring. The causes of gold chlorination reactions and polarization effects are identified and effectively prevented by analyzing the effects of direct current (DC) and alternating current (AC) voltages, AC frequencies, and exposed sensing areas of the conductivity (salinity) sensors. Accordingly, a performance diagram is constructed to provide guidance for the selection of operation parameters for the salinity sensor. We also convert the varying impedance values of salinity sensors at different salinity levels into output voltage signals using a voltage divider circuit with an AC voltage (0.6 V) source. The results offer an assessment of the accuracy and response time of the salinity sensors, as well as their potential for integration with data transmission components for real-time ocean monitoring. This study has important implications for the development of soft, flexible, Au-based electrochemical sensors that can operate efficiently in diverse biological fluids and marine environments.
24 June 2023 in Soft Matter
A soft, flexible pressure sensor is developed to measure hydrostatic pressure in the ocean environment, which can be potentially integrated with many platforms including diver equipment and marine animal tags for real-time pressure monitoring.
26 October 2021 in IEEE Transactions on Electron Devices
Heat generation in integrated circuits (ICs) has become a severe issue, which limits the utilization of miniaturized semiconductor devices in high-density 3-D IC technologies. Herein, Al 2 O 3 was doped in ZrO 2 thin films by plasma-enhanced atomic layer deposition (PEALD) to enhance their antiferroelectric (AFE) characteristics for highly reliable electrocaloric (EC) cooling applications. The cycling endurance in AFE behaviors of the Al:ZrO 2 thin films under a high electric field of 5 MV/cm was significantly improved because of the enlargement of the energy bandgap with high resistance in trap-induced leakage current. Hence, the reliability of the EC effect of the 1% Al:ZrO 2 thin film was examined with a negligible change in adiabatic temperature change ( $\Delta {T}$ ) of 2.6% after a cycling endurance test of $10^{{6}}$ cycles. With the competitive cycling reliabilities in AFE and EC behaviors, devices with optimized Al 2 O 3 -incorporated ZrO 2 thin films show significant potential for future nanoscale cooling systems in chip-level ICs.
21 August 2026 in Science Advances
Real-time ocean monitoring enables instantaneous oceanographic analysis and supports maritime operations. However, conventional sensors require metallic housings to withstand high hydrostatic pressure, increasing their weight and power demand. Soft electronics offer a promising alternative, but their functionality and commonly used electromagnetic communication are ineffective underwater. Here, we present a pressure-tolerant, miniaturized ocean-sensing tag that seamlessly integrates soft conductivity, temperature, and depth (CTD) sensors with acoustic transducers for in situ monitoring and underwater data transmission. Measuring 17 mm by 20 mm by 7.5 mm and weighing 4.90 g, the tag maintains reliable performance under hydrostatic pressures of up to 15 MPa, corresponding to a depth of approximately 1,500 m, and achieves underwater transmission ranges of up to 492.7 m. Field testing in the Salish Sea demonstrates wireless, real-time CTD monitoring with measurement accuracy comparable to commercial sensors and reliable acoustic telemetry (87.34% detection efficiency and 100% accuracy over evaluated transmission distances). This ocean sensing platform enables energy-efficient deployment on diverse platforms and significantly advances next-generation ocean observation and deep-sea exploration.