18 May 2022 in Nuclear Technology
Equilibrium state generation for the pebble bed reactor (PBR) is challenging due to the need to simultaneously account for both pebble movement and changes in fuel compositions. Multigroup diffusion codes have been historically employed to generate the equilibrium state and perform conventional neutronics calculations for PBRs, while neutron cross-section generation has been challenging due to the double heterogeneity of PBRs. Thanks to the capability to treat the double heterogeneity naturally, continuous-energy Monte Carlo (MC) methods are more suitable for detailed PBR analysis, but at the cost of significantly higher computing power. This paper presents a new Methodology to Efficiently Estimate the Equilibrium State of a PBR (MEEES-PBR) to generate equilibrium-state MC models for PBRs at lower computational expense. The MEEES-PBR is expected to contribute to the future development of PBR designs by accelerating the efforts in core designs and parametric studies. The theory of the MEEES-PBR is introduced in detail in this paper, and the procedure is demonstrated via an example application to the 165-MW(thermal) Xe-100 design. The computational cost and the accuracy of the MEEES-PBR are discussed to prove its viability.
1 December 2020 in Nuclear Engineering and Design
13 April 2021 in Nuclear Technology
A one-dimensional (1-D) thermal stratification (TS) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. This paper performs uncertainty quantification (UQ) of the 1-D TS model to evaluate its performance by considering the aleatoric uncertainties that existed in the model parameters and to identify the plausible sources of the epistemic uncertainties. The Latin hypercube sampling–Monte Carlo method (LHS-MC), which is elaborated with an example in this paper to facilitate its understanding and implementation, is used for the UQ process. The advantages of LHS-MC, including both better stability and better accuracy than the conventional random sampling–Monte Carlo method with fewer realizations, are demonstrated in this paper. In total, 648 temperature measurements acquired from nine experimental transients performed in a university-scale Thermal Stratification Experimental Facility are used to evaluate the performance of the computational 1-D TS model. The UQ result shows that 77.5% of the experimental data can be predicted by the 1-D TS model within uncertainty ranges, which indicates the good performance of the computational model when the aleatoric uncertainties are correctly captured. The rest 22.5% of the experimental data are found located outside of the uncertainty ranges, which reveals the existence of the epistemic uncertainties caused by the lack of understanding of the TS phenomenon and defects in the 1-D model. The simple jet model currently employed by the 1-D TS model is thought to be one of the attributors to these defects.
5 November 2020 in Nuclear Science and Engineering
Computational modeling and simulations are widely used for evaluation of the performance and safety features of innovative nuclear reactor designs. Multigroup-based deterministic neutronics codes are often employed in these reactor design calculations because they can provide fast predictions of the neutron flux distribution and other neutronics characteristic parameters. Nevertheless, providing accurate multigroup cross sections for deterministic codes is an onerous job, which makes establishing an exhaustive cross-section library computationally prohibitive. Partly because of these reasons, multigroup neutron cross sections are normally stored only at certainty state points in the data library of these deterministic codes, and linear interpolation methodology is commonly utilized to estimate the cross sections at unknown states. However, the applicability of linear interpolation is limited, and the precision of its results is moderate. In this paper, we discuss a preliminary feasibility study that we performed on providing more precise multigroup cross sections for deterministic neutronics codes by using the linear regression methodology. Compared to the traditional linear interpolation method, the linear regression approach principally showed improved computational efficiency considering the use of more data in the cross-section library, and constructed hypothesis functions for the responses of interest with a higher order of accuracy. In this study, a case study on Lightbridge Corporation’s metallic fuel element was carried out to demonstrate the feasibility and advantages of linear regression in multigroup cross-section interpretation. A reference cross-section library was established through calculations conducted with the Monte Carlo neutronic code Serpent. Because of the preliminary nature of this feasibility study, only the macroscopic total cross section is considered. Linear interpolation and linear regression were both used to estimate cross sections at unknown states based on the data available in the library. By comparing the performance of both methodologies, we demonstrated that the linear regression methodology achieved wider applicability and better precision in cross-section interpretation. Moreover, the linear regression process was finished within 15 s using a single processor core, which indicated that the additional computational burden brought by the implementation of linear regression methodology in the task was acceptable.
1 February 2021 in Progress in Nuclear Energy
4 May 2021 in Nuclear Technology
Thermal stratification (TS) is a thermal-fluid phenomenon that can introduce large uncertainties to nuclear reactor safety. The stratified layers caused by TS can lead to temperature oscillations in the reactor core. They can also result in damages to both the reactor vessel and in-vessel components due to the growth of thermal fatigue cracks. More importantly, TS can impede the establishment of natural circulation, which is widely used for passive cooling and ensures the inherent safety of numerous reactor designs. A fast-running one-dimensional (1-D) model was recently developed in our research group to predict the TS phenomenon in pool-type sodium-cooled fast reactors. The efficient 1-D model provided reasonable temperature predictions for the test conditions investigated, but nonnegligible discrepancies between the 1-D predictions and the experimental temperature measurements were observed. These discrepancies are attributed to the model uncertainties (also known as model bias or errors) in the 1-D model and the parameter uncertainties in the input parameters. In this study, we first recognized through a forward uncertainty analysis that the observed discrepancies between the computational predictions and the experimental temperature measurements could not be explained solely by input uncertainty propagation. We then performed an inverse uncertainty quantification (UQ) study to reduce the model uncertainties of the 1-D model using a modular Bayesian approach based on experimental data. Inverse UQ serves as a data assimilation process to simultaneously minimize the mismatches between the predictions and experimental measurements, while quantifying the associated parameter uncertainties. The solutions of the modular Bayesian approach were in the form of posterior probability density functions, which were explored by rigorous Markov Chain Monte Carlo sampling. Results showed that the quantified parameters obtained from the inverse UQ effectively improved the predictive capability of the 1-D TS model.