1 July 2023 in Journal of Advanced Ceramics
Large degradation in thermal insulation and strain tolerance is a main headache and primary cause of failure for plasma-sprayed thermal barrier coatings (TBCs) during service. One mechanism behind such degradation is the healing of interlamellar pores formed by multiple connections between the edges of a pore, which significantly speeds up the healing during thermal exposure. The objective of this study is to obtain sintering-resistant TBCs by tailoring the width of interlamellar pores to avoid multiple connections. Firstly, mechanism responsible for the multiple connections was revealed. The splat surface before and after thermal treatments were characterized via atomic force microscopy. The roughening of the pore surface occurs during thermal exposure, along with grain growth inside the splats. Consequently, local surface height increases, which causes multiple connections and healing of interlamellar pores. Secondly, critical widths of interlamellar pores to avoid multiple connections during thermal exposure is established by correlating the extent of surface roughening with the growth of individual grains. The height increase of the splat surface and growth of grain size were found to increase with the exposure temperature and duration. A relationship linking height increase and grain size growth induced by thermal exposure in plasma-sprayed ceramic splats was obtained. Finally, composite TBCs were prepared to form wide interlamellar pores in the coatings. Using this design, increases in thermal conductivity and elastic modulus can be prevented to a large extent. Thus, sintering-resistant TBCs that maintain a high thermal insulation and strain tolerance, even after long thermal exposure, can be created.
1 February 2021 in Progress in Nuclear Energy
1 September 2017 in Energy Procedia
1 January 2023 in SSRN Electronic Journal
Natural hazard-induced events, such as the Fukushima Daiichi accident that occurred in 2011, have led to an increased interest in understanding nuclear power plant responses to external events such as earthquakes and floods. External hazards could cause the loss of offsite power in nuclear power plants, potentially leading to a Station Blackout (SBO) accident. The Reactor Safety Study (WASH-1400) indicates that SBO significantly contributes to the overall risk of nuclear power plant accidents. Therefore, there is a need to understand better the SBO accident scenarios caused by external hazards and the risks associated with plant responses during SBO accidents. This paper employed the reactor safety analysis code RELAP5-3D to perform a series of thermal-hydraulic evaluations and safety studies of external hazard-induced SBO scenarios for a generic pressurized water reactor (PWR). The original RELAP5-3D model of the Westinghouse four-loop design PWR was modified and customized to simulate the external hazard-induced SBO accident. The simulation starts with the loss of offsite power situation that triggered short-term and long-term SBO scenarios. To better understand the effect of different external intervening parameters, a sensitivity study of the long-term SBO with respect to reactor operation times was carried out, and the responses of various thermal-hydraulic parameters of interest as functions of time during SBO scenarios were analyzed. The results of the analyses showed that the safety analysis code RELAP5-3D is effective in examining SBO accidents until the start of core damage. Additionally, some important timing parameters of key event sequences estimated by RELAP5-3D provide plant operators with insights regarding the time to restore emergency alternating current power or turbine-driven auxiliary feedwater pump to prevent potential core damage. This information can also be useful for risk-informed decision-making processes.
17 September 2026 in Energy and AI