1 October 2018 in Decision Support Systems
16 July 2010 in The Journal of Adhesion
Adhesive bonding is increasingly being used in structural applications such as in automotive joints. The theoretical analyses and experimental data are generally for rigid and strong epoxy adhesives. Elastomeric adhesives such as polyurethanes are used in structural applications such as windshield bonding because they present important advantages in terms of damping, impact, fatigue, and safety which are critical factors in the automotive industry. However, there are other structural applications in the main body where polyurethanes may also be used. The main objective of the present project is to compare the behaviour of structural joints used in the automotive industry, such as single lap joints and T-joints made of rigid adhesives, and those made of elastic adhesives in terms of stiffness, strength, impact, damping, and fatigue. The elastomeric adhesive selected was a polyurethane from Sika (Sikaflex® 256) and the structural adhesive selected was an epoxy from Huntsman (Araldite® AV138/HV998). The shear strength of the polyurethane is approximately four times lower than that of the epoxy. However, the polyurethane shear failure strain is 330%, whereas that of the epoxy is only 6%. The benefits of using elastomeric adhesives in structural adhesive joints used in the automotive industry are described, especially in terms of ductility, impact, and fatigue.
7 August 2012 in Journal of Adhesion Science and Technology
This work focuses on the development and testing of a technique used to measure strain levels inside an adhesive joint. As more industries adopt high performance structural adhesives, the need for structural monitoring and quality control of adhesive joints rises. The method presented in this work, based on optic fibers, is proposed as a possible means for real-time health monitoring of adhesive connections. In the first part of this work a procedure for embedding optical fibers etched with Bragg sensors is explained. Instrumented, single lap joints were fabricated and subjected to tensile test. The results were compared with finite element models to ensure the accuracy and provide a better understanding of the measurement process.
19 March 2025 in Journal of Retailing and Consumer Services
19 February 2021 in U.Porto Journal of Engineering
Adhesive bonding is increasingly being used in industrial applications mainly due to its adaptability and ability to reliably join a wide range of materials. Numerous industrial sectors have now adopted adhesive bonding as a key manufacturing technology, with the automotive industry being the leader in adhesive usage. This is a key sector for the European Union (climate and energy policy, which has established a target of improving energy efficiency in the European Union by 20% by 2020. Consequently, this industry is constantly demanding lighter, stronger, more durable and more environmentally friendly materials. The increasing popularity of this technology is linked to the noteworthy benefits related with its application, compared to traditional joining process, such as welding or mechanical fastening process. With the increasing popularity of such joining techniques comes the necessity to train qualified professionals. The European Welding Federation developed a harmonized qualification system, which divides the training process into 3 levels: European Adhesive Bonder (EAB), Specialist (EAS) and Engineer (EAE). Currently, in Portugal, the first level of training, corresponding to European Adhesive Bonder is already in operation. The EAB level is accredited by the European Welding Federation (EWF) and therefore meets the requirements of EWF-515r1-10 and EWF-515r2-19 to which the Faculty of Engineering of the University of Porto is bound as a result of the accreditation as an ATB (Authorized Training Body). This training is targeted for professionals using adhesive bonding technology and professionals who do not currently use this technology but want to use it, and as such has a strong practical component. In Portugal, since 2016, three EWF certified editions have been held, with a high approval rate and met the expectations and objectives of the participants.
3 September 2021 in Journal on Teaching Engineering
The technology of adhesive bonding is experiencing rapid growth in Europe and in other world markets, leading to products of improved quality. Therefore, a strong competitive advantage is gained if industries are able to master the knowledge, competencies and techniques needed for the implementation of vital manufacturing techniques. Harmonised training systems have become crucial to respond to the labour market needs and to link education to industrial environments. The AdTech project developed a European harmonized training system to support the industries that depend on the availability and knowledge of professionals to better leverage the adhesive practice. This project tackled this challenge by supporting the development of high-quality work-based vocational educational training for adhesive bonding, encompassing professional profiles that will cover the industries’ requirements regarding the application of adhesive technologies. With AdTech, it has been possible to address training needs, develop harmonised curricula and implement a sustainable consortium.