3 April 2015 in Journal of the Electrochemical Society
The active particle morphology and microstructure affect the impedance behavior of intercalation electrodes due to the underlying charge transport, active material/electrolyte interfacial surface area, and solid-phase diffusion in lithium-ion batteries (LIB). In order to capture the impact of the electrode microstructural variability on the impedance response, an integrated electrochemical impedance predictive analysis is presented. In the analysis, stochastically reconstructed 3-D microstructures of representative LIB electrodes are considered with variations in the active material morphology and particle size distribution. With the properties evaluated from the virtual 3-D microstructures, the corresponding impedance response is predicted. The concept of electrochemical Sauter mean diameter (ESMD) has been introduced to investigate the effect of active particle morphology, such as particle agglomeration. This integrated analysis is envisioned to offer a virtual impedance response probing framework to elucidate the influence of electrode microstructural variability and underlying electrochemical and transport interactions.
29 January 2024 in Nature Communications
Pitting corrosion in seawater is one of the most difficult forms of corrosion to identify and control. A workhorse material for marine applications, 316L stainless steel (316L SS) is known to balance resistance to pitting with good mechanical properties. The advent of additive manufacturing (AM), particularly laser powder bed fusion (LPBF), has prompted numerous microstructural and mechanical investigations of LPBF 316L SS; however, the origins of pitting corrosion on as-built surfaces is unknown, despite their utmost importance for certification of LPBF 316L SS prior to fielding. Here, we show that Mn-rich silicate slags are responsible for pitting of the as-built LPBF material in sodium chloride due to their introduction of deleterious defects such as cracks or surface oxide heterogeneities. In addition, we explain how slags are formed in the liquid metal and deposited at the as-built surfaces using high-fidelity melt pool simulations. Our work uncovers how LPBF changes surface oxides due to rapid solidification and high-temperature oxidation, leading to fundamentally different pitting corrosion mechanisms.
13 September 2024 in Energy & Environmental Science
Formulating and establishing design principles to improve low-temperature performance of battery electrolytes.
1 September 2019 in Electrochimica Acta
4 November 2022 in Electrochimica Acta
2 January 2025 in Nature Communications
Aqueous corrosion of metals is governed by formation and dissolution of a passivating, multi-component surface oxide. Unfortunately, a detailed atomistic description is challenging due to the compositional complexity and the need to consider multiple kinetic factors simultaneously. To this end, we combine experiments with a first-principles-derived, multiscale computational framework that transcends thermodynamic descriptions to explicitly simulate the kinetic evolution of surface oxides of Ni-Cr alloys as a function of composition, temperature, pH, and applied voltage. In the absence of pitting, we identify three distinct voltage regimes, which are kinetically dominated by oxide growth, dissolution, and competitive dissolution and reprecipitation. Evolving compositional gradients and oxide thickness are revealed, including a transition between a metastable Ni-Cr mixed oxide and a thick, porous Ni-dominated oxide. Beyond elucidating the underlying physics, we highlight the need for competing kinetics in models to properly predict the transition from passivation to corrosion. Our results provide a key step towards co-design of alloy composition alongside environmental conditions for sustainable use across a variety of critical energy and infrastructure applications.