High dielectric constant multilayer coatings are commonly used on high-reflection mirrors for high-peak-power laser systems because of their high laser-damage resistance. However, surface contaminants often lead to damage upon laser exposure, thus limiting the mirror’s lifetime and performance. One plausible approach to improve the overall mirror resistance against laser damage, including that induced by laser-contaminant coupling, is to coat the multilayers with a thin protective capping (absentee) layer on top of the multilayer coatings. An understanding of the underlying mechanism by which laser-particle interaction leads to capping layer damage is important for the rational design and selection of capping materials of high-reflection multilayer coatings. In this paper, we examine the responses of two candidate capping layer materials, made of and , over silica-hafnia multilayer coatings. These are exposed to a single oblique shot of a 1053 nm laser beam (fluence , pulse length 14 ns), in the presence of Ti particles on the surface. We find that the two capping layers show markedly different responses to the laser-particle interaction. The cap layer exhibits severe damage, with the capping layer becoming completely delaminated at the particle locations. The capping layer, on the other hand, is only mildly modified by a shallow depression. Combining the observations with optical modeling and thermal/mechanical calculations, we argue that a high-temperature thermal field from plasma generated by the laser-particle interaction above a critical fluence is responsible for the surface modification of each capping layer. The great difference in damage behavior is mainly attributed to the large disparity in the thermal expansion coefficient of the two capping materials, with that of layer being about 15 times greater than that of .
The inhibitory effect of linear enantiomers of L- and D-Asp6 on the growth of calcium oxalate monohydrate crystal has been investigated using in situ atomic force microscopy. The inhibitory magnitude of D-Asp6 on the growth of the [00] step on the (010) face is about 10% larger than that of L-Asp6. While no chiral effect is observed or expected on the growth of the [0] step on the (01) face by both enantiomers, their inhibitory effect on this step is much stronger than that on the [00] step on the (010) face. In both cases, the step morphology indicates that these enantiomers create the impurity pinning along the steps, while the dependence of step speed on supersaturation shows that they also produce a reduction of the step kinetic coefficients. Analysis of the step speed data within the context of an existing model for step pinning and kink blocking shows that the major impact of Asp6 is to block active kink sites. The larger inhibition of the [00] step growth by D-Asp6 over L-Asp6 and the substantially larger inhibition of the [0] step over the [00] step by both enantiomers both result from larger affinity for adsorption to the (010) face and the (01) face, respectively. This is because the larger adsorption leads to a higher density of blocking kink sites along the steps. The estimated difference in binding energy of L- and D-Asp6 to the respective faces from the kinetics model is consistent with the trend predicted by our molecular modeling of the enantiomer binding to the faces.
1 June 2015 in Physical Chemistry Chemical Physics
Spectrometry is combined with first-principles simulations of solvated Cu2+ complexes to elucidate the roles of ligand coordination, d-orbital fine structure, complex geometry, and solvation environment in determining optical absorption profiles.
High intensity and high energy laser facilities place increasing demands on optical components, requiring large surface area optics with exacting specifications. Petawatt lasers are high energy, short-pulse laser systems generally based on chirped-pulse amplification, where an initial low energy short pulse is stretched, amplified, and then recompressed to produce fs to ps high-power laser pulses. In such petawatt lasers, the highest demands are placed on the final optics, including gratings which compress the pulses and mirrors which direct and focus the final high-power beams. The limiting factor in these optical components is generally laser-induced damage. Designing and fabricating these optical components to meet reflection, dispersion, and other requirements while meeting laser-induced damage requirements is the primary challenge discussed in this tutorial. We will introduce the reader to the technical challenges and tradeoffs required to produce mirrors for petawatt lasers and discuss current research directions.