21 December 2017 in IOP Conference Series: Materials Science and Engineering
This paper considers an analytical and a numerical approach in the design of a concentric tube heat exchanger. Sensible heat transfer is considered in the analysis and the heat exchanger is developed for actual operating conditions in a chemical plant. The heat exchanger is a concentric tube heat exchanger where hot oil exchanges heat with hot water. Hot oil is in the inner pipe and the heating medium, hot water, is in the outer pipe (annular side) of the heat exchanger. An analytical model employing effectiveness-number of transfer units (ε-NTU) approach and log mean temperature difference (LMTD) approach were employed in the design of the concentric tube heat exchanger. In the design process, performance charts were developed for concentric tube heat exchanger. Performance charts describe the performance of the heat exchanger in terms of crucial dimensionless parameters. Performance charts help to select the right number of transfer units (NTU) for the given heat exchanger. Both parallel and counter flow configurations were considered for the design analysis. Likewise, a numerical model was also considered in the design of the heat exchanger. The results from the analysis are presented and compared. From the results it can be seen that both numerical and analytical approaches produce the exact same results. The designer certainly has the flexibility to choose an appropriate design methodology based on the available inputs and requirements.
10 December 2018 in MATEC Web of Conferences
This manuscript considers the operational flammability limits of commercial fuels used in the automotive and in the aviation industry. Commonly employed fuels are considered in this study. Understanding the flammability limits is an important aspect while choosing right fuel for a given application. An explosion of stored fuel or combustion system can be catastrophic and can create a serious impact to the society. Therefore, researchers while developing fuels and combustion systems must give considerable attention. This manuscript reviews the effect of vapour pressure and temperature on flammability of fuels and reviews the auto ignition and flash point temperature of fuels commonly seen in the automotive and in the aviation industry.
1 January 2018 in International Journal of Mechanical Engineering and Robotics Research
10 December 2018 in MATEC Web of Conferences
KSKarthik Silaipillayarputhur
Karthik Silaipillayarputhur
This paper considers an analytical approach in the design of a passive heat sink for an ABB electrical drive. The heat sink is intended to dissipate a certain amount of heat energy and to maintain the surface temperature of an electronic communication board at the prescribed temperature. The maximum size of the heat sink is known due to the existing space constraint. This paper details the step by step procedure in the development of a passive heat sink that functions based on the natural convection. Two commonly used fins such as rectangular plate fins and rectangular pins fins were considered for the project. A parametric study was considered wherein a relationship was developed between the convection heat transfer coefficient and the air flow. Likewise, the impact of convection heat transfer coefficient was seen on the rate of heat transfer and the fin geometry.
31 May 2017 in MATEC Web of Conferences
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry