In recent years, thanks to additive manufacturing technology, researchers have gone towards the optimization of bone scaffolds for the bone reconstruction. Bone scaffolds should have appropriate biological as well as mechanical properties in order to play a decisive role in bone healing. Since the fabrication of scaffolds is time consuming and expensive, numerical methods are often utilized to simulate their mechanical properties in order to find a nearly optimum one. Finite element analysis is one of the most common numerical methods that is used in this regard. In this paper, a parametric finite element model is developed to assess the effects of layers penetration׳s effect on inter-layer adhesion, which is reflected on the mechanical properties of bone scaffolds. To be able to validate this model, some compression test specimens as well as bone scaffolds are fabricated with biocompatible and biodegradable poly lactic acid using fused deposition modeling. All these specimens are tested in compression and their elastic modulus is obtained. Using the material parameters of the compression test specimens, the finite element analysis of the bone scaffold is performed. The obtained elastic modulus is compared with experiment indicating a good agreement. Accordingly, the proposed finite element model is able to predict the mechanical behavior of fabricated bone scaffolds accurately. In addition, the effect of post-heating of bone scaffolds on their elastic modulus is investigated. The results demonstrate that the numerically predicted elastic modulus of scaffold is closer to experimental outcomes in comparison with as-built samples.
Shape memory alloy (such as NiTi) cellular lattice structures are a new class of advanced materials with many potential applications. The cost of fabrication of these structures however is high. It is therefore necessary to develop modeling methods to predict the functional behavior of these alloys before fabrication. The main aim of the present study is to assess the effects of geometry, microstructural imperfections and material asymmetric response of dense shape memory alloys on the mechanical response of cellular structures. To this end, several cellular and dense NiTi samples are fabricated using a selective laser melting process. Both cellular and dense specimens were tested in compression in order to obtain their stress–strain response. For modeling purposes, a three -dimensional (3D) constitutive model based on microplane theory which is able to describe the material asymmetry was employed. Five finite element models based on unit cell and multi-cell methods were generated to predict the mechanical response of cellular lattices. The results show the considerable effects of the microstructural imperfections on the mechanical response of the cellular lattice structures. The asymmetric material response of the bulk material also affects the mechanical response of the corresponding cellular structure.
28 July 2016 in Journal of Intelligent Material Systems and Structures
This article seeks to reduce the stiffness of NiTi parts from a nonporous state to that of human bone by introducing porosity. Compact bone stiffness is between 12 and 20 GPa while the currently used bone implant materials are several times stiffer. While very stiff implants and/or fixation hardware can temporarily immobilize healing bone, it also causes stress shielding of the surrounding bone and commonly results in stress concentrations at the implant or immobilization hardware’s fixation site(s). Together these processes can lead to implant or fixation hardware and/or the surrounding bone’s failure. Porous NiTi can be used to reduce the stiffness of metallic implants while also providing necessary stabilization or immobilization of the patient’s reconstructed anatomy. In this work, mechanical behavior of porous NiTi with different levels of porosity is simulated to show the relation between the stiffness and porosity level. Then porous structures are fabricated through additive manufacturing to validate the simulation results. The results indicate that stiffness can be reduced from the bulk value of 69 GPa to as low as 20.5 GPa for 58% porosity. The simulation shows that it is possible to achieve a wide range of desired stiffness by adjusting the level of porosity.