1 August 2022 in Geophysics
The Lord-Shulman thermoporoelasticity theory couples the Biot and hyperbolic heat equations to describe wave propagation, modeling explicitly the effects of heat and fluid flows. We have extended the theory to the case of double porosity by taking into account the local heat flow (LHF) and local fluid flow (LFF) due to wave propagation. The plane-wave analysis finds the presence of the classical P and S waves and three slow P waves, namely, the slow (Biot) P1, the slow (Biot) P2, and a thermal slow P wave (or T wave). The frequency-dependent attenuation curves find that these slow waves manifest as Zener-like relaxation peaks, which are loosely related to the LFF, Biot, and LHF loss mechanisms. The viscosity and thermoelasticity properties can lead to the diffusive behavior of the three slow P modes. However, the S wave is considered to be independent of fluid and temperature influence. We examine the effect of thermophysical properties (e.g., thermal conductivity and relaxation time) on the wave velocity and attenuation of different modes. It is confirmed that the T wave is prone to be observed in media with high thermal conductivities and high homogeneity at high frequencies. Our double-porosity thermoelastic model reasonably explains laboratory measurements and well-log data from ultradeep fractured carbonates at high temperatures.
16 June 2021 in Journal of Geophysics and Engineering
For most rocks, the typical temperature behavior of elastic wave velocities generally features a three-stage nonlinear characteristic that could be expressed by a reverse S-shape curve with two inflexion points. The mechanism regulating the slow-to-fast transition of elastic constants remains elusive. The physics of critical points seems related to the multimineral composition of rocks with differentiated thermodynamic properties. Based on laboratory experiments for several rocks with different levels of heterogeneity in compositions, we conduct theoretical and empirical simulations by nonlinear thermoelasticity methods and a S-shape model, respectively. The classical theory of linear thermoelasticity based on the Taylor expansion of strain energy functions has been widely used for crystals, but suffers from a deficiency in describing thermal-associated velocity variations for rocks as a polycrystal mixture. Current nonlinear thermoelasticity theory describes the third-order temperature dependence of velocity variations by incorporating the fourth-order elastic constants. It improves the description of temperature-induced three-stage velocity variations in rocks, but involves with some divergences around two inflexion points, especially at high temperatures. The S-shape model for empirical simulations demonstrates a more accurate depiction of thermal-associated three-stage variations of P-wave velocities. We investigate the physics of the parameters ${a_1}$ and ${b_1}$ in the S-shape model. These fitting parameters are closely related to thermophysical properties by being proportional to the specific heat and thermal conductivity of rocks. We discuss the mechanism that regulates the slow-to-fast transition in the three-stage nonlinear behavior for various rocks.
23 January 2023 in Geophysics
Fractured-vuggy thermal reservoirs with complex pore spaces (stiff pores, cracks, and fractures) are typical geothermal resources for development and utilization in China. The cyclic recovery of such thermal reservoirs involves a complex thermo-hydro-mechanical (THM) coupling process. Insights into the thermoelastic effects of heating-cooling cycles on the seismic response have great potential for seismic monitoring in the cyclic recovery, which remains largely unaddressed in the literature. We intend to fill this gap by applying the double-porosity thermoelasticity theory to interpret ultrasonic measurements on granite under water-cooling conditions. We consider an isotropic porous host embedded with fractures. A plane-wave analysis yields the classical P and S waves and three slow P waves, namely the slow (Biot) P1, the slow (Biot) P2, and a thermal P. We investigate the combined effect of temperature, porous structure, and pore fluid on the thermoelastic properties of the THM process for typical granite reservoirs that experience a cold-shock process. Fractures provide the main channels for heat exchange and fluid flow. Our THM thermoelastic model describes the reservoir properties as a function of temperature associated with thermal-induced cracking, where fracture porosity is more important than the stiff (host) pore to describe the reservoir quality. We find that the thermal conductivity and specific heat have negligible effects in the seismic frequency band for the temperature range of less than 400°C, whereas the crack density significantly affects the seismic response in the heating-cooling cycles because of the additional contribution of thermal- and cold-shock-induced cracks. We further determine that the P-wave velocity and attenuation due to thermal effects under water cooling offer an important index to monitor the thermal-induced cracking and operation efficiency of the enhanced geothermal system. The THM thermoelastic model lays the foundation for active (or passive) seismic monitoring of the cyclic recovery of thermal reservoirs.
18 April 2026 in Chinese Journal of Physics
5 September 2025 in Rock Mechanics and Rock Engineering