2 April 2022 in Rock Mechanics and Rock Engineering
16 September 2022 in Journal of Geophysical Research: Solid Earth
9 August 2021 in Journal of Geophysics and Engineering
Thermally coupled constitutive relations are generally used to determine material constants and elastic moduli (Young's modulus and shear modulus) of solid media. Conventional studies on this issue are mainly based on the linear temperature dependence of elastic moduli, whereas analytical difficulties are often encountered in theoretical studies on nonlinear temperature dependence, particularly at high temperatures. This study investigates the thermally coupled constitutive relations for elastic moduli and material constants using the assumption of axisymmetric fields, with applications to geologic materials (marble, limestone and granite). The Taylor power series of the Helmholtz free energy function within dimensionless temperatures could be used to develop the thermally coupled constitutive relations. The thermoelastic equivalent constitutive equations were formulated under the generalized Hooke's law. The material constants of solid rocks were determined by fitting experimental data using axisymmetric stress and strain fields at different temperatures, based on their thermomechanical properties. For these geologic materials, the resultant equivalent elastic moduli and deformations were in good agreement with those from the experimental measurements. Thermal stresses, internal moisture evaporation and internal rock compositions significantly affected the experimental results. This study provides a profound understanding of the thermally coupled constitutive relations that are associated with the thermomechanical properties of solid rocks exposed to high temperatures.
1 July 2022 in Natural Resources Research
23 January 2023 in Geophysics
Fractured-vuggy thermal reservoirs with complex pore spaces (stiff pores, cracks, and fractures) are typical geothermal resources for development and utilization in China. The cyclic recovery of such thermal reservoirs involves a complex thermo-hydro-mechanical (THM) coupling process. Insights into the thermoelastic effects of heating-cooling cycles on the seismic response have great potential for seismic monitoring in the cyclic recovery, which remains largely unaddressed in the literature. We intend to fill this gap by applying the double-porosity thermoelasticity theory to interpret ultrasonic measurements on granite under water-cooling conditions. We consider an isotropic porous host embedded with fractures. A plane-wave analysis yields the classical P and S waves and three slow P waves, namely the slow (Biot) P1, the slow (Biot) P2, and a thermal P. We investigate the combined effect of temperature, porous structure, and pore fluid on the thermoelastic properties of the THM process for typical granite reservoirs that experience a cold-shock process. Fractures provide the main channels for heat exchange and fluid flow. Our THM thermoelastic model describes the reservoir properties as a function of temperature associated with thermal-induced cracking, where fracture porosity is more important than the stiff (host) pore to describe the reservoir quality. We find that the thermal conductivity and specific heat have negligible effects in the seismic frequency band for the temperature range of less than 400°C, whereas the crack density significantly affects the seismic response in the heating-cooling cycles because of the additional contribution of thermal- and cold-shock-induced cracks. We further determine that the P-wave velocity and attenuation due to thermal effects under water cooling offer an important index to monitor the thermal-induced cracking and operation efficiency of the enhanced geothermal system. The THM thermoelastic model lays the foundation for active (or passive) seismic monitoring of the cyclic recovery of thermal reservoirs.